Abstract:Coral reefs thrive in complex marine geological environments and are likely to suffer from dynamic marine disasters. The liquefaction characteristics of saturated marine coral sand subjected to dynamic loading, such as ocean waves, submarine earthquakes, storm tides, volcanic activities, and hurricanes, are key factors affecting the safety of coral reefs. A systematic study is conducted through a series of hollow-cylinder torsional shear experiments on the undrained response of saturated marine coral sand with different non-plastic fines contents (FCs) under cyclic linear stress paths with various cyclic loading direction angles (& alpha;d). An interesting discovery is that the cyclic linear stress paths with angles & alpha;d and 90 degrees- & alpha;d have the same stress effect on liquefaction char-acteristics under isotropic consolidation condition. The test results show that if the near-zero effective stress state is defined as the criterion for initial liquefaction, then the liquefaction resistance of saturated coral sand de-creases with increasing & alpha;d or FC. The generation of excess pore water pressure (EPWP) presents three modes: (1) "rapid-stable-fast," (2) "rapid-stable," and (3) "fast linear-like." Moreover, an energy-based EPWP prediction method is established. A novel discovery is that the generalized shear strain amplitude (& gamma;ga) is uniquely related to the EPWP ratio of coral sand for a given relative density and FC. In addition, by introducing unit cyclic stress ratio (USR) as a new index of liquefaction resistance, a common correlation between equivalent skeleton void ratio e*sk and USR15 (required for initial liquefaction in 15 cycles) is established for all test cases considered. This is confirmed by the experimental data of five types of terrestrial siliceous sands reported in the literature.

Unique determination of cyclic instability state in flow liquefaction of sand

Flow Deformation and Cyclic Resistance of Saturated Loose Sand Considering Initial Static Shear Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Cyclic Flow Behavior of Anisotropically Consolidated Sand with a Small Amount of Fines

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Flow Liquefaction Potential of Loose Sand: Stress Path Envelope and Energy-Based Evaluation

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

EXPERIMENTAL STUDY OF INSTABILITY OF LOOSE SAND

Drained Instability in Loose Granular Material

Liquefaction of Sand under Monotonic and Cyclic Shear Conditions: Impact of Drained Preloading History

Experimental Investigation of Cyclic Failure Mechanism of Saturated Coral Sand under Various Consolidation Conditions

Liquefaction characteristics of saturated marine coral sand with different non-plastic fines content subjected to complex cyclic stress paths

Experimental Study on Undrained Behavior of Saturated Silt Subject to Wave Loading

Prediction of the initial point of the last cycle in undrained cyclic triaxial tests on flow liquefaction

Liquefaction resistance of anisotropically consolidated sand under monotonic and cyclic undrained torsional shear

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Experimental Investigation of Liquefaction Characteristics of Saturated Coral Sand Subjected to Complex Cyclic Stress Paths: Effects of Loading Frequency