Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Prediction of the initial point of the last cycle in undrained cyclic triaxial tests on flow liquefaction

Flow Deformation and Cyclic Resistance of Saturated Loose Sand Considering Initial Static Shear Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Predicting Cyclic Liquefaction Behavior of Saturated Granular Materials Using an Updated State Evolution Model

Flow Liquefaction Potential of Loose Sand: Stress Path Envelope and Energy-Based Evaluation

Liquefaction of Sand under Monotonic and Cyclic Shear Conditions: Impact of Drained Preloading History

Strain and pore pressure development on soft marine clay in triaxial tests with a large number of cycles

Prediction of dynamic pore water pressure for calcareous sand mixed with fine-grained soil under cyclic loading

Undrained Behavior of Natural Marine Clay under Cyclic Loading

Cyclic Deformation Behaviour of Natural K 0 -Consolidated Soft Clay under Different Stress Paths

Discrete Element Study on Large Strain Dynamic Characteristics of Loose Sand Under Different Loading Control Modes

Unique determination of cyclic instability state in flow liquefaction of sand

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Dynamic Flow Characteristics Of Liquefied Sand Under The Extrema Large Deformation In The Cyclic Torsional Shear Tests

A machine learning approach to predicting pore pressure response in liquefiable sands under cyclic loading

Strain energy dissipation during liquefaction of fibre-reinforced sand under undrained cyclic triaxial loading