Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Electroosmotic Flow In Tree-Like Branching Microchannel Network

Electroosmotic Flow in Fractal Tree‐Like Convergent Microchannel Network

Combined Electroosmotic And Pressure Driven Flow In Tree-Like Microchannel Network

Numerical and Experimental Investigation of Mixing Characteristics in the Constructal Tree-Shaped Microchannel

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

The Optimal Branch Width Convergence Ratio to Maximize the Transport Efficiency of the Combined Electroosmotic and Pressure-Driven Flow within a Fractal Tree-like Convergent Microchannel

Optimization of a Fractal Treelike Microchannel Network with Uniform Roughness for Laminar Flow

Local Interactions and the Global Organization of a Two-Phase Flow in a Branching Tree.

Thermal-hydraulic performance of flat-plate microchannel with fractal tree-like structure and self-affine rough wall

Design of Microfluidic Channel Networks with Specified Output Flow Rates Using the CFD-based Optimization Method

Scaling Laws for Optimised Power-Law Fluid Flow in Self-Similar Tree-like Branching Networks

Numerical Simulation And Research On The Electroosmotic Flow In The Curve Channel

RESEARCH ON DIFFUSION IN MICRO-CHANNEL FLOW DRIVEN BY ELECTROOSMOSIS

Exploring fluid flow in microchannels with branching and variable constrictions

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

Optimal Flow and Scaling Laws for Power-Law Fluids in Elliptical Cross-Section Self-Similar Tree-Like Networks

Computational fluid dynamic–discrete element method coupling analysis of particle transport in branched networks

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

Scaling Laws for Optimal Herschel–Bulkley Yield Stress Fluid Flow in Self-Similar Tree-like Branching Networks

Scaling Laws for Optimal Power-Law Fluid Flow within Converging-Diverging Dendritic Networks of Tubes and Rectangular Channels

Numerical calculation of the electroosmotic flow at the cross region in microfluidic chips.