Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Electroosmotic Flow in Fractal Tree‐Like Convergent Microchannel Network

The Optimal Branch Width Convergence Ratio to Maximize the Transport Efficiency of the Combined Electroosmotic and Pressure-Driven Flow within a Fractal Tree-like Convergent Microchannel

Electroosmotic Flow In Tree-Like Branching Microchannel Network

Optimization Analysis of Fractal Tree-Like Microchannel Network for Electroviscous Flow to Realize Minimum Hydraulic Resistance

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Combined Electroosmotic And Pressure Driven Flow In Tree-Like Microchannel Network

Optimization of a Fractal Treelike Microchannel Network with Uniform Roughness for Laminar Flow

Analysis of fluid flow in fractal microfluidic channels

Conjugate Heat Transfer in Fractal Tree-Like Channels Network Heat Sink for High-Speed Motorized Spindle Cooling

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

Numerical Simulation And Research On The Electroosmotic Flow In The Curve Channel

Optimal Fractal Tree-Like Microchannel Networks with Slip for Laminar-Flow-modified Murray's Law

Thermal-hydraulic performance of flat-plate microchannel with fractal tree-like structure and self-affine rough wall

Design Of A Fractal Tree-Like Microchannel Net Heat Sink For Microelectronic Cooling

A Parametric Study of Laminar Convective Heat Transfer in Fractal Minichannels with Hexagonal Fins

Flow and heat transfer performance of asymmetric fractal tree network in fractal porous media

An analytical model for permeability of fractal tree-like branched networks composed of converging–diverging capillaries

Flow and heat transfer in comby fractal microchannel network

Experimental Investigation on Electroosmotic Transport in Cross-straight Channel

Electroosmotic Flow in Microchannels with Prismatic Elements

RESEARCH ON DIFFUSION IN MICRO-CHANNEL FLOW DRIVEN BY ELECTROOSMOSIS