Abstract:Core needle biopsy (CNB) is widely used in active surveillance, which is the current standard of care for low risk prostate cancers. A longer biopsy sample length may improve the accuracy of diagnosis. To increase the biopsy sample length, the magnetic abrasive finishing (MAF) technique was applied to decrease the needle inner friction force, which may hinder the tissue from entering the lumen of the biopsy needle. To assess the effectiveness of these MAF polished needles as compared to the unpolished needles, a method to measure the three components of axial force during hollow needle insertion—tip cutting force, inner friction force, and outer friction force—was developed. Six tissue-mimicking samples of different lengths were used to find the linear relationship between the sum of the cutting force and inner friction force and the phantom length or contact length. Linear regression method was used to extrapolate and estimate the tip cutting force and the inner friction force. With this method, the difference between the inner friction force of the needles with and without polishing was found. The results showed that the unpolished needles had an inner friction force 40–50% higher and a tip cutting force 22% higher than their MAF polished counterparts. We also found that MAF polished needles had an average of 9% longer contact length between the sample and the inner wall than unpolished needles, indicating that a longer sample can be extracted at a lower friction force. The results of our investigation implied that reducing the inner surface roughness of a biopsy needle could reduce inner friction forces.

Using Simulation To Study Cutting Force In Biopsy Needle Insertion With Bi-Directional Rotation

Tissue Cutting Mechanics and Applications for Needle Core Biopsy and Guidance

Cutting Force Of Hollow Needle Insertion In Soft Tissue

Study of the effect of cannula rotation on tissue cutting for needle biopsy

Contributions in Medical Needle Technologies—geometry, Mechanics, Design, and Manufacturing

Computational and Experimental Study of Vibrational Motions on Tissue Cutting for Solid Biopsy Needles

Experimental Study of Needle–tissue Interaction Forces: Effect of Needle Geometries, Insertion Methods and Tissue Characteristics

The Needle With Lancet Point: Geometry for Needle Tip Grinding and Tissue Insertion Force

Measurement of the Friction Force Inside the Needle in Biopsy

Interactive Simulation of Surgical Needle Insertion into Soft Tissue

A Mechanics-Based Model For Simulating The Needle Deflection In Transverse Isotropic Tissue For A Percutaneous Puncture

Experimental and simulation investigation of surgical needle insertion into soft tissue mimic biomaterial for minimally invasive surgery (MIS)

Bevel-Tip Needle Deflection Modeling, Simulation, and Validation in Multi-Layer Tissues

Optimal Needle Design for Minimal Insertion Force and Bevel Length.

Study of the surgical needle and biological soft tissue interaction phenomenon during insertion process for medical application: A Survey

Effect of vibration on insertion force and deflection of bioinspired needle in tissues

Advanced Five-Plane Lancet Needle Design, Grinding, and Tissue Insertion

In-Silico Analysis of Optimal Configurations for Rotational Bioinspired Bone Marrow Biopsy Needle Designs: An ANN Approach

Needle deformation in the process of puncture surgery: experiment and simulation

Interaction Modeling and Simulation of a Flexible Needle Insertion into Soft Tissues

Design and evaluation of a novel biopsy needle with hemostatic function