Abstract:Brillouin-based optical fiber sensing has gained considerable attention for the past few years thanks to its ability to offer distributed sensing. The major limitation of a Brillouin-based optical fiber sensor is its complexity because a time-consuming frequency-sweeping process is needed to obtain a local Brillouin gain spectrum (BGS) and to calculate the local Brillouin frequency shift (BFS). Thus, it is only suitable for static or slow-varying measurements. In this article, we propose an approach to achieve truly distributed and ultra-fast fiber-optic sensing based on an active and distributed bandpass microwave photonic filter (MPF) through stimulated Brillouin scattering (SBS). To obtain a truly distributed BFS, a counter-propagating single-shot pump pulse is launched into the fiber link and a microwave multi-tone (MMT) signal with a random initial phase distribution which is phase modulated on an optical carrier is launched into the fiber link from the other end. Due to the SBS effect, the -1st order sideband of the phase-modulated signal will experience Brillouin amplification while the +1st order sideband will experience Brillouin attenuation, and the phase-modulated signal is converted to an intensity-modulated signal. The entire operation is equivalent to a bandpass MPF. By detecting the optical signal at a photodetector (PD), a regenerated MMT signal with its magnitude and phase that are shaped by the MPF is obtained. By evaluating the regenerated MMT signal, the Brillouin information corresponding to the temperature or strain change at a specific location is revealed. The major advantage of the approach is that time-consuming frequency-sweeping process is avoided. Truly distributed strain, temperature, and vibration sensing with a 2 m spatial resolution over 49.5 m distance at a speed up to 83.3 kHz is experimentally demonstrated.

Sensitivity-Enhanced Fiber-Optic Sensor in a Microwave Photonics Fiber Loop Ringdown System

Sensitivity-Improved Curvature Sensor Based on Microwave-Photonic Fiber Ring Resonator

A microwave photonic scheme for improving the sensitivity of Mach-Zehnder optical fiber interferometer sensor

High-sensitivity sensor fabricated on the basis of single-mode fiber loop using frequency-sweeping-generated ringing effect

High-sensitivity sensor using frequency sweeping generated ringing effect in single-mode fiber-loops

Frequency down-converted and sensitivity enhanced fiber optic sensing system based on multi-passband microwave photonic filter by cascaded fiber optic interferometers

High-sensitivity Optical Sensors Based on Cascaded Reflective MZIs and Microring Resonators

Research on Ultra-High Sensitivity Fiber-Optic Cascaded Fabry-Perot Resonator Optical Sensor Based on the Comb-Spectrum Vernier Effect

High Sensitivity Fiber-Optic Strain Sensor Based on Modified Microfiber-Assisted Open-Cavity Mach-Zehnder Interferometer

Optical sensor using space-domain active fiber cavity ringdown technique

Sensitivity Enhanced Refractive Index Sensor With In-Line Fiber Mach-Zehnder Interferometer Based on Double-Peanut and Er-Doped Fiber Taper Structure

Highly Sensitive Optical Fiber Micro-Cavity Sensors

Multimode Fiber Loop Ring Down Spectroscopy for Pressure Measurement

Enhancing the Sensitivity of Interferometer Using Fiber Resonators

Multimode Fiber Ring‐down Pressure Sensor

High-resolution liquid level sensor utilizing a microwave photonics interrogated multicore fiber interferometer

Fiber Loop Ring-Down Refractive Index Sensor Based on High-<inline-formula> &Lt;tex-Math Notation="tex">$q$ &Lt;/tex-Math></inline-formula> Photonic Crystal Cavity

Enhancing the Sensitivity of Fiber Mach-Zehnder Interferometers Using Slow and Fast Light.

A fiber-integrated ultrabroadband optical power sensor based on multi-walled carbon nanotubes and U-shaped fiber with bandwidth ranging from 405 nm to 7.767 μ m

Optoelectronic hybrid oscillating fiber-optic sensor with attosecond precision and reconfigurable sensitivity

Truly Distributed and Ultra-Fast Microwave Photonic Fiber-Optic Sensor