Abstract:The brick kiln industry is one of the largest and most highly unregulated industrial sectors in developing countries. Most of the kilns use low-quality coal as primary fuel along with small quantities of bagasse, rice husk, and wooden chips. As a result of inefficient methods of combustion in conventional brick kilns, such as fixed chimney Bull’s trench kilns (FCBTKs), harmful pollutants are emitted in high quantities, which ultimately deteriorate the environment and are widely in operation in Pakistan. The most prominent harmful pollutants include carbon dioxide (CO2), carbon monoxide (CO), sulphur dioxide (SO2), black carbon (BC), and particulate matter less than 2.5 microns (PM2.5). Over the years, new technologies have been adopted by developed countries for the reduction of environmental burdens. One of these technologies is induced draught zigzag kilns (IDZKs), or zigzag kilns (ZZKs), technology, which effectively improves the combustion across the path of bricks stacked in a zigzag pattern. For the mass adoption of this technology, environmental assessment and comparison of both technologies is a crucial step. Both types of kiln sites are investigated for the analysis of their emissions and their environmental impact in this work. Carbon mass balance equations are used for the calculation of emission factors. Collected inventory data is then used for the life cycle assessment of both types of kilns using open LCA (version 1.10.3) and the Eco-invent database. According to the study, ZZK technology outperforms FCBTK in all aspects. The analysis of the specific energy consumption (SEC) of fired bricks for each kiln type reveals that ZZKs require 30% less energy than the conventional FCBTK. This implies that ZZKs demand lesser fuel than FCBTKs. The zigzag technology adoption scenario, in particular, can lead to approximately 30% lower CO2 emissions, which can be further reduced by up to 80% when taking into account black carbon (BC) emissions. Additionally, the adoption of zigzag technology can result in a 35% decrease in PM2.5 emissions. The study shows that adopting ZZK technology significantly reduces impact categories, such as particulate matter formation (PMF), photochemical oxidant formation (POF), and terrestrial acidification (TA) by 63%, 93%, and 95%, respectively.

Investigation on the technical and economic benefits of implementing biomass gasifier in clay brick manufacturing industries

A Simulation and Experimental Investigation of the Thermal Characteristics of Refractory Bricks Produced Using Fireclay and Agroforestry Wastes

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures

Analysing the Effectiveness of Municipal Wastewater Sludge, Bagasse Ash, Rice Husk Ash and Plastic Waste Powder for Manufacturing Bricks

MANUFACTURING OF CLAY BRICKS BY USING Water Treatment Plant SLUDGE

Large CO2 reduction and enhanced thermal performance of agro-forestry, construction and demolition waste based fly ash bricks for sustainable construction

Technical and Economic Feasibility of Combusting Biocarbon in Small Scale Pellet Boilers

Developing fired clay bricks by incorporating scrap incinerated waste and river dredged sediment

Transforming waste disposals into building materials to investigate energy savings and carbon emission mitigation potential

Investigating the Impact of Shifting the Brick Kiln Industry from Conventional to Zigzag Technology for a Sustainable Environment

Cleaner production of geopolymer bricks using Solar-LPG hybrid dryer

An engineering assessment of the burning of the combustible fraction of construction and demolition wastes in a redundant brick kiln

Numerical Investigations on the Enhancement of Convective Heat Transfer in Fast-Firing Brick Kilns

An investigation of various properties of hybrid bricks using Natural fibers and waste fiber-based materials

Mechanical properties optimization and cost analysis of agricultural waste as an alternative in brick production

Development of low thermal conductivity brick using rice husk, corn cob and waste tea in clay brick manufacturing

Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash

Techno-economic assessment of sugarcane bagasse pith-based briquette production and performance analysis of briquette feed gasifier-engine system

Evaluation of waste glass powder to replace the clay in fired brick manufacturing as a construction material

Evaluation of physical and mechanical properties of fired-clay bricks incorporating both mineral and organic wastes

Potential pathway for reusing paper mill sludge ash as a supplementary material in alkali-activated bricks