Evaluation of waste glass powder to replace the clay in fired brick manufacturing as a construction material

Maanashi Tripathi,Vinay Bhushan Chauhan

DOI: https://doi.org/10.1007/s41062-021-00492-2

2021-04-15

Innovative Infrastructure Solutions

Abstract:Brick is one of the common and vital construction materials which is used in all masonry works. A large land area is required for acquiring the voluminous quantity of the clay for brick manufacturing. An alternative material for clay, if burnt into brick, needs to be identified that can be added in brick as a replacement of clay in such a quantity that can effectively reduce the clay consumption as well as finely maintain the desirable qualities of the bricks. Therefore, this study evaluates the utilization of waste glass powder (WGP), as a potential alternative for partially replacing clay, in the manufacturing process of fired clay bricks by carrying out various engineering tests such as compressive strength, water absorption, dimension tolerance, colour variation, hardness, soundness, efflorescence, structure, and resistance against the impact on the clay only bricks and the bricks incorporating the WGP with varying proportions. The study revealed that the optimum WGP content is 20% by weight of the clay brick, which shows only 8.5% water absorption and a 77% rise in the compressive strength of the brick. Also, it is noted that a kiln temperature of 800 to 900 °C was required for baking the brick containing WGP, which is less than that required for the brick prepared by clay only. Economic analysis indicates that there can be an 11.3% saving of manufacturing cost with the use of 20% by weight of the WGP in the clay brick.