Abstract:Objective Optical fiber is an efficient propagation carrier of laser energy. A short-pulse laser can be focused on the end of a fiber to realize the directional propagation of energy along the carrier path. Therefore, the efficient and high-energy transmission of laser energy can be realized by inducing a plasma detonation wave with an underwater fiber laser. The integration of underwater fiber laser propulsion technology with various scientific and technological advancements holds significant promise in fields such as green ship manufacturing, submarine stealth propulsion, detonation engine performance, and supercavitation weapon systems. In the medical field, vascular embolism and thrombotic disease caused by endovascular thrombus flaking are still intractable diseases. Traditional thrombectomy and interventional hemolysis can cause harmful complications. For example, a thrombectomy can easily cause large-scale bleeding and the embolization of blood vessels. In view of the prominent problems with traditional thrombus removal, the technique of underwater fiber laser propulsion has been applied to the targeted removal of blood vessel thrombi. Based on fiber conduction, a short-pulse laser-induced plasma detonation wave propulsion scheme is proposed as part of the technical research on the noninvasive comprehensive treatment of thrombi. To explore the propagation characteristics of laser-induced plasma detonation waves, the feasibility of the fixed-point and directional noninvasive removal of thrombi using fiber laser-induced plasma detonation waves is verified by combining experiments and simulations. Methods This study analyzed the mechanism of underwater fiber laser-induced plasma shock wave propulsion. It modeled a thrombus in a human blood vessel, creating two environments for underwater fiber-optic laser propulsion. The study employed numerical simulations to observe the propagation process of plasma shockwaves generated by laser energy. First, the model,propagation mechanism, and absorption mechanism of laser plasma detonation waves were determined. Second, using a numerical simulation method for the energy source term and plasma equation of state, the thrombus propulsion in two blood environments was numerically simulated, and the pressure cloud image and thrust curve of the detonation waves acting on the thrombus were obtained.Then, we analyzed the factors influencing the thrombus progression. These influence factors were determined to be the amount of laser energy and the size and shape of the thrombus, and a corresponding numerical simulation was carried out to obtain the thrust curve conforming to certain rules. Finally, based on the characteristics of the thrombus, experiments that used an underwater fiber laser to push a single microsphere and microsphere cluster were carried out to verify the feasibility of thrombus removal. Results and Discussions The numerical simulation results show that the pressure variation of a plasma detonation wave with9 mJ of laser energy decreases rapidly with distance and time, and the detonation wave pressure exceeds 108 Pa within 100 mu m from the center (Fig.6). The peak thrust force of a detonation wave on the thrombus first increases and then decreases. In arterial and venous blood environments, the peak thrust forces produced with 20 mu J of laser energy on 2 mm thrombi can reach 1.2 and 1.0 N,respectively (Fig.10), which can be used for thrombus clearance. The peak thrust on the thrombus is affected by the laser energy and the size and shape of the thrombus. As the laser energy increases from 5 to 25 mu J, the peak thrust on the thrombus increases continuously (Fig.11). As the size of the thrombus increases from 1 to 3 mm, the peak thrust on the thrombus gradually increases,and the shape of the thrombus also has a significant impact on the peak thrust. A 3 mm square thrombus shows a larger peak thrust than a 3 mm spherical thrombus (Fig.12). The experimental results show that a laser with an energy of 25 mu J can be used to propel a microsphere particle with a diameter of 50 mu m, which has an obvious movement of approximately 300 mu m in 4 ms (Fig.15). A laser with an energy of 36 mu J can be used to break up microsphere clusters of 50 mu m microsphere particles into discrete particles that can then be removed (Fig.16). Conclusions With the goal of treating human vascular embolism, this paper discusses the construction of two different human vascular models and numerical simulations of human blood environments. The research shows that when using laser propulsion, the peak thrust on a human thrombus can exceed 1.0 N, and the thrust attenuation is a rapid process. The whole process will cause no harm to human blood vessels, and a human thrombus can be cleared by laser plasma detonation wave propulsion. At the same time,experimental data on how underwater fiber laser plasma detonation waves push microspheres and clusters are collected, and the experimental results are extended to the vascular environment to verify the feasibility of using a fiber laser to move a thrombus.Therefore, fiber laser plasma detonation waves can be used to push and clear a micro-thrombus and break up the thrombus clusters formed by the agglomeration of micro-thrombi.

Study on the mechanism of thrombus ablation in vitro by burst‐mode femtosecond laser

Blood Clot Ablation Effects Based on Burst- Mode Femtosecond Laser

Ablation Efficiency of a Novel Thulium Fiber Laser: an in Vitro Study on Laser Setting and Fiber Usage.

Safety of a Novel Thulium Fiber Laser for Lithotripsy: an in Vitro Study on the Thermal Effect and Its Impact Factor.

Application and Progress of Laser Technology for Thrombus Ablation

Dynamic Evolution of Liquid Plasma Induced by Femtosecond Laser Pulse

Numerical Simulation of Thrombus Propulsion Mechanism Induced by Laser Plasma Detonation Wave

In vitro analysis of mechanism of pulsed-laser thrombolysis

Modeling the Femtosecond Laser Pulse-Train Ablation of Dielectrics

Passively Mode-Locked Erbium-Doped Fiber Laser and Application in Laser Thrombolysis

Study on mechanism of biburst mode in femtosecond laser ablation through in-situ monitoring

In vitro study of ablation of rat bladder epithelial tissues by femtosecond laser

Ablation of porcine subcutaneous fat and porcine aorta tissues by a burst-mode nanosecond-pulsed laser at 355 nm

MXene-based Q-switched fiber laser and application in laser thrombolysis

Experiment and Research on 355nm Ultraviolet Laser Ablation of Coronary Artery Thrombosis

An In Vitro Study of 355‐nm Laser Ablation of Atherosclerotic Lesions Model

A Model to Predict the Ablation Width and Calculate the Ablation Threshold of Femtosecond Laser

An in vitro feasibility study of 355 nm laser atherectomy for the treatment of peripheral atherosclerotic lesions

Ablation shape determination under ultrafast laser pulse irradiation

Bi-stability in femtosecond laser ablation by MHz bursts

A New Model of Pulsed Laser Ablation and Plasma Shielding