Abstract:Polyaniline (PANI) particles were synthesized using aniline (AN), dodecyl benzene sulfonic acid (DBSA), and ammonium persulfate (APS). The particles were analyzed using scanning electron microscope (SEM), X‐ray diffraction (XRD), and fourier transform infrared spectroscopy (FTIR). A PANI/waterborne polyurethane composite material (PANI‐WPU) was obtained by combining it with polyethylene glycol (PEG600), diphenylmethane diisocyanate (MDI), dimethylol propionic acid (DMPA), N‐methyl pyrrolidone (NMP), and dibutyltin lauric acid (DBTDL). The structure was characterized by the FTIR spectrum. The mechanical characteristics of the coating film were evaluated with respect to the PANI content, as well as its water absorption, glossiness, electrochemical corrosion resistance, and acid and alkali resistance. The PANI/waterborne polyurethane film has a maximum tensile strength of 23 ±1 MPa, an elongation of 1012%, a pencil hardness of 5H, a flexibility of 2 mm, an impact resistance of 50 cm, the water absorption of 14.66%, and the glossiness of 99.9 ±0.1 at 60°. When the PANI content is 0.7%, the mechanical characteristics, glossiness, and anti‐corrosion performance of the composite film improve. The corrosion inhibition efficiency of the aqueous polyurethane coating film with PANI can reach 99.74%, as shown by the examination of electrochemical polarization curves and impedance spectra. The tinplate is coated with a 0.7% PANI‐WPU composite material and edge sealing. This coating provides excellent protection against acid and alkali resistance, as demonstrated by its ability to withstand immersion in 10% H2SO4 and 10% NaOH solution for 90 days without any paint peeling off.

Research progress on preparation methods of water-soluble polyaniline

Preparation of Polyaniline Doped with Acid and Polymer Using Electrochemical Deposition

Preparation and Properties of Polyaniline–anionic Spherical Polyelectrolyte Brushes Nanocomposite

Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase.

Effects of Acidity on the Size of Polyaniline-Poly(sodium 4-Styrenesulfonate) Composite Particles and the Stability of Corresponding Colloids in Water

Water-soluble polyaniline and its composite with poly(vinyl alcohol) for humidity sensing

Progress in preparation, processing and applications of polyaniline

Synthesis of Water-soluble Sulphonated Polyaniline

Preparation and corrosion resistance of polyaniline and waterborne polyurethane composite coating film

Chemical synthesis of cross-linked polyaniline by a novel solvothermal metathesis reaction of p-dichlorobenzene with sodium amide

Facile Preparation of Polyaniline Nanoparticles and Their Dispersion for Waterborne Anticorrosion Coatings

HUMIDITY SENSITIVE PROPERTIES OF WATER SOLUBLE POLYANILINE

Method for preparing water-soluble conductive polyaniline

Synthesis of Highly Hydrophilic Polyaniline Nanowires and Sub‐Micro/Nanostructured Dendrites on Poly(propylene) Film Surfaces

Preparations, Properties, and Applications of Polyaniline and Polyaniline Thin Films—A Review

Conductive polyaniline-based composition for spray coating

Preparation of polyethylene glycol-polyaniline multi-alternating block copolymer

Direct access to xylene solution of polyanilines via emulsion polymerization-extraction method facilitating the preparation of conductive film materials

Preparation and Electrochromism of Polyaniline Films by in-situ Polymerization

Recent Progress in the Preparation of Polyaniline Nanostructures and Their Applications in Anticorrosive Coatings

Research Progress on Applications of Polyaniline (PANI) for Electrochemical Energy Storage and Conversion