Abstract:Precise size control and general synthesis of ultrafine noble metal-based catalysts are very important in electrochemical energy conversion technologies. Herein, we develop the ultrafine MCu (M = Pt, Au, and Pd) alloy nanoparticles anchored on the porous N-doped carbon nanofibers (MCu/p-NCNFs) by the electroless deposition method. The as-prepared MCu alloy nanoparticles possess ultrafine particles sizes (<10 nm) and are uniformly anchored on p-NCNFs, which are derived from electrospun polyacrylonitrile (PAN) nanofibers. Owing to the desired composition and structure, the as-prepared PtCu/p-NCNFs with an ultrafine alloy size (≈3.5 nm) exhibits significantly enhanced electrocatalytic activity and stability toward methanol electrooxidation as well as the outstanding CO antipoisoning ability. This work offers a new general strategy for the fabrication of ultrafine alloy nanoparticles on a porous nitrogen-doped carbon support as highly efficient electrocatalysts for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jpcc.0c03460?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jpcc.0c03460</a>.Schematic illustration for the fabrication of MCu/p-NCNFs; SEM and TEM images with low magnification of as-prepared Cu/p-NCNFs; TEM image with high magnification of as-prepared Cu/p-NCNFs; SEM image with high magnification of as-prepared PtCu/p-NCNFs; CVs of the p-NCNFs in 0.5 M H2SO4 aqueous solution at 10 mV s–1; TEM image and size distribution of PtCu NPs; TEM images of PtCu/p-NCNFs synthesized using 3.5, 5, and 7 mM H2PtCl6 aqueous solution; XRD patterns of PtCu/p-NCNFs synthesized using different concentrations of H2PtCl6 aqueous solution and different time of electroless deposition; TEM images of PtCu/p-NCNFs synthesized by 5, 20, and 60 min electroless deposition; schematic illustration of metal nanoparticle deposition on carbon nanotubes via the substrate-enhanced electroless deposition process in previous studies; N2 adsorption–desorption isotherm and pore size distribution curve, survey XPS spectra, and C 1s XPS spectra of Cu/p-NCNFs and PtCu/p-NCNFs; CV curves in 0.5 M H2SO4 + 1 M CH3OH at 50 mV s–1; CV curves of PtCu/p-NCNFs and commercial Pt/C from the 1st to 200th cycle; TEM images of the PtCu/p-NCNFs and PtCu NPs after 200 cycles; histograms for size distribution of alloy nanoparticles in as-prepared PdCu/p-NCNFs and AuCu/p-NCNFs; EDS spectra of PdCu/p-NCNFs and AuCu/p-NCNFs; comparisons of the experimental parameters of as-reported research studies that use the SEED method to fabricate the MNPs/C system; and composition of different PtCu/p-NCNFs samples based on the ICP-AES analysis (<a class="ext-link" href="/doi/suppl/10.1021/acs.jpcc.0c03460/suppl_file/jp0c03460_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesizing Carbon‐Supported, High‐Loading, Ultra‐Small Pt3Ni Nanoparticles via Tuning the Surface Electrostatic Effect

Shaped Pt-Ni Nanocrystals with an Ultrathin Pt-enriched Shell Derived from One-Pot Hydrothermal Synthesis As Active Electrocatalysts for Oxygen Reduction

Simple and Scalable Mechanochemical Synthesis of Noble Metal Catalysts with Single Atoms Toward Highly Efficient Hydrogen Evolution

Size Controllable Metal Nanoparticles Anchored on Nitrogen Doped Carbon for Electrocatalytic Energy Conversion

One-Pot Synthesis of Ultra-Small Pt Nanoparticles-Loaded Nitrogen-Doped Mesoporous Carbon Nanotube for Efficient Catalytic Reaction

General Synthesis of Ultrafine Cu-Based Alloy Nanoparticles Anchored on Porous N-Doped Carbon Nanofibers for Enhanced Electrocatalytic Performance

Synthesis of supported platinum nanoparticles from Li-Pt solid solution.

Engineering of anchor sites and reaction time to efficiently synthesize high loading and stable sub-nanocluster catalysts

Facile Synthesis of Highly Dispersed and Well‐Alloyed Bimetallic Nanoparticles on Oxide Support

Particle Size-Controlled Growth of Carbon-Supported Platinum Nanoparticles (Pt/C) through Water-Assisted Polyol Synthesis

Synthesis of Carbon-Supported Sub-2 Nanometer Bimetallic Catalysts by Strong Metal–sulfur Interaction

High-Temperature Synthesis of Carbon-Supported Bimetallic Nanocluster Catalysts by Enlarging the Interparticle Distance

Ultra-small platinum nanoparticles segregated by nickle sites for efficient ORR and HER processes

Carbon-Supported High-Loading Sub-4 nm PtCo Alloy Electrocatalysts for Superior Oxygen Reduction Reaction

A General Strategy Assisted with Dual Reductants and Dual Protecting Agents for Preparing Pt-Based Alloys with High-Index Facets and Excellent Electrocatalytic Performance.

Size-Controlled Synthesis of Sub-10 Nm PtNi3 Alloy Nanoparticles and Their Unusual Volcano-Shaped Size Effect on ORR Electrocatalysis.

Transient and general synthesis of high-density and ultrasmall nanoparticles on two-dimensional porous carbon via coordinated carbothermal shock

Sintering behavior of carbon-supported Pt nanoparticles and the effect of surface overcoating

Octahedral PtNi nanoparticle catalysts: exceptional oxygen reduction activity by tuning the alloy particle surface composition.

Sustainable solid-state synthesis of uniformly distributed PdAg alloy nanoparticles for electrocatalytic hydrogen oxidation and evolution

Engineering Pt Nanoparticles with Fe and N Codoped Carbon to Boost Oxygen Reduction Catalytic Performance in Acidic Electrolyte