Abstract:The comparative study of biodegradation of various blown films obtained from Poly (lactic) acid (PLA) has been studied via soil burial method. A total of 3-different types of films prepared from neat PLA and the reactive blends containing poly butylenes succinate-co-adipate (PBSA), and thermoplasticized starch (TPS); namely VPLA, PLA/PBSA, PLA/TPS respectively were the subjects of investigation. Several analytical techniques including weight loss method and analysis of mechanical properties were performed in each seven days interval until ninety days to elucidate the biodegradation in soil. The tensile modulus of VPLA and PLA/PBSA blown films were deteriorated to the tune of 60.32% and 71.28% respectively within 28 days, while PLA/TPS blown films recorded a significant reduction of 75.31% in the modulus value within 21 days of soil exposure compared to unexposed blown film samples. Similarly, blown films of PLA/TPS reported the highest rate of weight loss in the order of 40.06% in 90 days of soil burial with an estimated half-life of 103 days in soil environment compared to its counterparts. The depletion in both mechanical properties and weight of the film samples suggesting the occurrence of biodegradation in the real soil environment. Scanning electron microscopy (SEM) revealed the formation of coarse morphology for all three types of soil buried samples which trace of microbial action appeared on PLA/TPS films. Fourier transform infrared microscope (FTIR) showed the decrease in carbonyl index and variation in the intensities of carbonyl and hydroxyl peaks irrespective of the film samples after 90 days of soil exposure. Gel permeation chromatography (GPC) documented reduction in molecular weight and variation in polydispersity index (PDI) of post-exposed soil samples. The elemental analysis exhibited that the percentage of organic carbon and hydrogen content of all the films decreased while the oxygen percentage increased after soil burial due to the biodegradation of film specimens. Both Differential scanning calorimetry (DSC) and X-ray diffraction analysis (XRD) reported increase in crystallinity for soil exposed samples indicating the initiation of degradation kinetics preferably at the amorphous region of film composition. It has also been inferred that the biodegradation mechanism of VPLA and PLA/PBSA blown films predominantly driven by hydrolysis of ester bond. Contrastingly, the biodegradation kinetics in case of PLA/TPS film has been proceeded with microbial assimilation of TPS component which further thrived on hydrolysis of PLA component of the blown film system.

Degradation of polylactic acid and polylactic acid/natural rubber blown films in aquatic environment

The degradation of polylactic acid face mask components in different environments

Surface modification of polylactide films and their hydrolytic degradation performances in artificial seawater

High toughness and fast home-compost biodegradable packaging films derived from polylactic acid/thermoplastic starch/para-rubber ternary blends

Soil burial degradation of bio-composite films from poly(lactic acid), natural rubber, and rice straw

Explication of mechanism governing atmospheric degradation of 3D-printed poly(lactic acid) (PLA) with different in-fill pattern and varying in-fill density

Degradation of Polylactic Acid/polybutylene Adipate Films in Different Ratios and the Response of Bacterial Community in Soil Environments.

A Comparison on Biodegradation Behaviour of Polylactic Acid (PLA) Based Blown Films by Incorporating Thermoplasticized Starch (TPS) and Poly (Butylene Succinate-co-Adipate) (PBSA) Biopolymer in Soil

Hydrolytic degradation and biodegradation of polylactic acid electrospun fibers

Degradation Behaviors of Polylactic Acid, Polyglycolic Acid, and Their Copolymer Films in Simulated Marine Environments

PLA/PCL/NR ternary blown films with high ductility and thermal shrinkage performance via dynamic vulcanization

Physicomechanical properties of biodegradable poly(D,L-lactide) and poly(D,L-lactide-co-glycolide) films in the dry and wet states

Biodegradation Behavior of Poly(Butylene Adipate-Co-Terephthalate) (PBAT), Poly(Lactic Acid) (PLA), and Their Blend in Freshwater with Sediment

Improved Weathering Performance of Poly(Lactic Acid) through Carbon Nanotubes Addition: Thermal, Microstructural, and Nanomechanical Analyses

Analysis of the Effect of Photo and Hydrodegradation on the Surface Morphology and Mechanical Properties of Composites Based on PLA and PHI Modified with Natural Particles

Biodegradation Behavior of Poly (Lactic Acid) (PLA), Poly (Butylene Adipate-Co-Terephthalate) (PBAT), and Their Blends Under Digested Sludge Conditions

The Influence of Processing Parameters on the Process and Product Properties of Polylactic Acid/Natural Rubber Blown Films

A review on degradation mechanisms of polylactic acid: Hydrolytic, photodegradative, microbial, and enzymatic degradation

The aging behavior of degradable plastic polylactic acid under the interaction of environmental factors

Enhancing Degradation of PLA-made Rigid Biodegradable Plastics with Non-Thermal Plasma Treatment

Susceptibility to Degradation in Soil of Branched Polyesterurethane Blends with Polylactide and Starch