Abstract:Coal mining often causes periodic disruption in the rock mass around the stope. The study of the deformation and failure characteristics of cyclic loading and unloading sandstone is very critical for gaining a thorough understanding of the mechanisms of rock damage, degradation, and failure. This kind of investigation is very helpful in determining the precursors of rock failure and the instability of engineering structures. In this research study, the properties of acoustic emission and infrared radiation of cyclic loading and unloading sandstone are explored using a cyclic loading and unloading sandstone experiment. Based on acoustic emission and infrared radiation, the loading–unloading response ratio of rock is established. It is found that the response variables of sandstone during the loading stage based on acoustic emission (AE) counts and the loading–unloading response ratio based on average infrared radiation temperature (AIRT) both rise suddenly in the last cycle, which may be a precursor of “acoustic-thermal” approaching rock failure. On this basis, the quantitative analysis index of infrared radiation of differential infrared energy change rate (DIECR) is proposed, that is, the change of square of ΔAIRT in unit time, and based on AE counts and DIECR, the loading–unloading response ratio of “acoustic-thermal” is defined. It is found that the “acoustic-thermal” loading–unloading response ratio suddenly increases during the penultimate cycle of loading and unloading. This feature can be taken as the initial precursor of rock failure. Together with the “acoustic-thermal” imminent failure precursor of rock, it constitutes the “initial precursor-imminent failure precursor” combined with the internal fracture and surface infrared radiation temperature field during the cyclic loading and unloading process of rock, realizing the hierarchical monitoring and early warning of cyclic loading and unloading rock failure. The research results lay a theoretical and practical foundation for using infrared radiation to monitor engineering disasters caused by rock fracture and failure in mining engineering.

Mechanical and microseismic characteristics of sandstones subject to moderate low-frequency differential cyclic loading (DCL) followed by monotonic loading up to failure

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Mechanical behaviour of medium-grained sandstones exposed to differential cyclic loading with distinct loading and unloading rates

Mechanical Behavior and Acoustic Emission Characteristics of Sandstone Under Different Cyclic Loading and Unloading Disturbance Rates

Mode-I failure and mechanical behavior of sandstone under cyclic loading: Laboratory testing and DEM simulation

Mechanical Properties and DEM-Based Simulation of Double-Fractured Sandstone under Cyclic Loading and Unloading

Hardening-damage evolutionary mechanism of sandstone under multi-level cyclic loading

Energy Evolution Characteristics of Sandstones During Confining Pressure Cyclic Unloading Conditions

Study on the Evolution of Mechanical Properties and Acoustic Emission of Medium-Permeability Sandstone under Multi-Level Cyclic Loading Stress Paths

Characterization of the mechanical behavior and constitutive modeling of sandstone under acidic dry-wet cycles and dynamic loading

Acoustic emission characteristics and fracture mechanism of sandstone in open-pit mines under different types of cyclic loads

Acoustic Emission Characteristics and Energy Evolution of Red Sandstone Samples under Cyclic Loading and Unloading

Study on the mechanical properties of unloading damaged sandstone under cyclic loading and unloading

Mechanical properties and energy evolution law of water bearing sandstone under cyclic loading

Precursors of Cyclic Loading and Unloading Sandstone Failure Based on “Acoustic-Thermal” Loading–Unloading Response Ratio

Failure mechanisms of coarse-grained sandstone under pure mode I/II loading: insights from energy evolution and acoustic emission

Experimental investigation on the shear mechanical behavior and energy evolution of sandstone subjected to pre-peak cyclic loading

Deformation and hysteresis behaviors of sandstone exposed to distinct sequences of variable-frequency compressive cyclic stresses

Mechanical and Acoustic Response of Low-Permeability Sandstone under Multilevel Cyclic Loading-Unloading Stress Path

Fatigue Behavior of Sandstone Exposed to Cyclic Point-Loading: Implications for Improving Mechanized Rock Breakage Efficiency

Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading