Abstract:In general, the effect of roll motion is not considered in the study on maneuverability in calm water. However, for high-speed twin-screw ships such as the DTMB 5415, the coupling effects of roll and other motions should be considered. Therefore, in this study, the estimation of maneuverability using a 4-degree-of-freedom (DOF; surge, sway, roll, yaw) maneuvering mathematical group (MMG) model was conducted for the DTMB 5415, to improve the estimation accuracy of its maneuverability. Furthermore, a study on the change in turning performance according to the fin angle was conducted. To accurately calculate the lift and drag forces generated by the fins, it is necessary to consider the three-dimensional shape of the wing, submerged depth, and effect of interference with the hull. First, a maneuvering simulation model was developed based on the 4-DOF MMG mathematical model, and the lift force and moment generated by the side fins were considered as external force terms. By employing the CFD model, the lift and drag forces generated from the side fins during ship operation were calculated, and the results were adopted as the external force terms of the 4-DOF MMG mathematical model. A 35° turning simulation was conducted by altering the ship’s speed and the angle of the side fins. Accordingly, it was confirmed that the MMG simulation model constructed with the lift force of the fins calculated through CFD can sufficiently estimate maneuverability. It was confirmed that the heel angle changes according to the fin angle during steady turning, and the turning performance changes accordingly. In addition, it was verified that the turning performance could be improved by increasing the heel angle in the outward turning direction using the side fin, and that the sway speed of the ship during turning can affect the turning performance. Hence, it is considered necessary to study the effect of the sway speed on the turning performance of a ship during turning.

Simulation study of the effect of loading condition changes on the maneuverability of a container ship

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Preliminary Study of Ship Maneuvering Prediction of Container Ship

Numerical Simulations of a Ship's Maneuverability in Shallow Water

Analysis of ship maneuvering difficulties under severe weather based on onboard measurements and realistic simulation of ocean environment

CFD-BASED SIMULATION OF THE FLOW AROUND A SHIP IN OBLIQUE MOTION AT LOW SPEED

Research on the influence of trimaran side hull layout on its manoeuvrability

Change in Turning Ability According to the Side Fin Angle of a Ship Based on a Mathematical Model

Quantitative Evaluation of Full-Scale Ship Maneuvering Characteristics During Berthing and Unberthing

Time Domain Simulations of Ship Maneuvering and Roll Motion in Regular Waves Based on a Hybrid Method

Comparative study of realistic ship motion simulation for optimal ship routing of a bulk carrier in rough seas

Ship maneuvering prediction based on virtual captive model test and system dynamics approaches

Numerical analysis on the seakeeping performances of a full-scale container ship hull using strip theory

Four-DOF Maneuvering Motion of a Container Ship in Shallow Water Based on CFD Approach

On the hydrodynamic derivatives with respect to heading angle for ship maneuvering in a canal

Estimation of Drifting Motion of Fishing Vessel Affected by Loading Condition

Validation of 6-DOF motion simulations for ship turning in regular waves

Research on Course-Changing Performance of a Large Ship with Spoiler Fins

Influence of scale effect on flow field offset for ships in confined waters

CFD Prediction of Ship Seakeeping and Slamming Behaviors of a Trimaran in Oblique Regular Waves

Investigation on the Effect of Container Configurations and Forecastle Fairings on Wind Resistance and Aerodynamic Performance of Large Container Ships