Abstract:In this study, three different hybrid numerical frameworks of potential and viscous flows are developed for ship maneuvering in waves, including a direct CFD simulation method based on URANS (hybrid framework 1), an efficient mean wave force method combining a frequency domain boundary element method (FDBEM) and viscous CFD (hybrid framework 2), and a novel hybrid numerical framework based on the functional decomposition model (hybrid framework 3), in which the propeller model is modelled using the iterative body-force model MOUM. The KCS container ship model, which has abundant available experimental data (including seakeeping tests in head and oblique waves, turning and zigzag maneuvering tests in calm water, and turning maneuvering tests in waves), is selected as the research subject. Firstly, these methodologies including a boundary wave-generation method, a FDBEM, and a SWENSE-based (Spectral Wave Explicit Navier-Stokes Equations) hybrid solver HUST-SWENSE are developed to address the issue of wave-induced motions and forces of ships in waves. HUST-SWENSE decomposes the total physical field into the incident field, obtained by potential flow theory, and the complementary field, solved by functional-decomposition single-phase level-set and RANS equations. A comprehensive convergence study of seakeeping performance using different mesh numbers of the hull and free surface for FDBEM is conducted to ensure accuracy and reliability. Additionally, a thorough numerical uncertainty analysis of ship motions in waves and turning circle in calm water for HUST-SWENSE is carried out. Then different seakeeping solvers for wave-ship interaction in head and oblique waves, as well as the body-force method MOUM in solving hull-propeller-rudder interaction, are validated. Finally, three hybrid numerical frameworks are constructed to solve the issue of ship maneuvering in waves. Results reveal that the hybrid framework 3 is an excellent alternative for predicting ship maneuvering in waves, with the same accuracy with framework 1 and the 75% improvement of computational efficiency. The hybrid framework 2 also exhibits great potential, as it improves computational efficiency by 95%.

On the hydrodynamic derivatives with respect to heading angle for ship maneuvering in a canal

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Motion Control of Docking Auv in Currents

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Numerical Investigation of Oblique Currents' Effects on the Hydrodynamic Characteristics of Ships in Restricted Waters

Rans investigation on the hydrodynamic performance of a ship moving obliquely in shallow and narrow channel

Simulation study of the effect of loading condition changes on the maneuverability of a container ship

A mathematical model for ships maneuvering in deep and shallow waters

Numerical analysis on the seakeeping performances of a full-scale container ship hull using strip theory

Numerical Simulations of a Ship's Maneuverability in Shallow Water

Influence of scale effect on flow field offset for ships in confined waters

Validation of 6-DOF motion simulations for ship turning in regular waves

A Hybrid Numerical Framework for Simulation of Ships Maneuvering in Waves

Four-DOF Maneuvering Motion of a Container Ship in Shallow Water Based on CFD Approach

CFD-BASED SIMULATION OF THE FLOW AROUND A SHIP IN OBLIQUE MOTION AT LOW SPEED

Ship Hydrodynamics of Several Typical Scenes During Inland Waterway Transport

Time Domain Simulations of Ship Maneuvering and Roll Motion in Regular Waves Based on a Hybrid Method

Hydrodynamic Prediction of Ship Including Heave and Trim

Solving for hydroelastic ship response using Timoshenko beam modes at forward speed

Towards autonomous inland shipping: a manoeuvring model in confined waterways

Assessment of Different Hybrid Methods for Simulations of Free Running Surface Ship Maneuvering in Waves