Abstract:The anaerobic digestion of the organic fraction of municipal solid waste and the biogas production obtained from its stabilization are becoming an increasingly attractive solution, due to their beneficial effects on the environment. In this way, the waste is considered a resource allowing a reduction in the quantity of it going to landfills and the derived greenhouse gas emissions. Simultaneously, the upgrading process of biogas into biomethane can address the issues dealing with decarbonization of the transport. In this work, the production of biogas obtained from the organic fraction of municipal solid wastes in a plug flow reactor is analyzed. In order to steer the chemical reactions, the temperature of the process must be kept under control. A new simulation model, implemented in the MatLab® environment, is developed to predict the temperature field within the reactor, in order to assess how the temperature affects the growth and the decay of the main microbial species. A thermal model, based on two equilibrium equations, is implemented to describe the heat transfer between the digester and the environment and between the digester and the internal heat exchanger. A biological model, based on suitable differential equations, is also included for the calculation of the biological processes occurring in the reactor. The proposed anaerobic digestion model is derived by the combination of these two models, and it is able to simultaneously simulate both thermal and biological processes occurring within the reactor. In addition to the thermal energy demand, the plant requires huge amounts of electricity due to the presence of a biogas upgrading process, converting biogas into biomethane. Therefore, the in-house developed model is integrated into a TRNSYS environment, to perform a yearly dynamic simulation of the reactor in combination with other renewable technologies. In the developed system layout, the thermal energy required to control the temperature of the reactor is matched by a solar thermal source. The electrical demand is met by the means of a photovoltaic field. In this work, a detailed thermoeconomic analysis is also proposed to compare the environmental impact and economic feasibility of a biomethane production plant based on a plug flow reactor and fed by renewables. Several economic incentives are considered and compared to determine the optimal solution, both in terms of energy and economic savings. The plant is designed for the treatment of a waste flow rate equal to 626.4 kg/h, and the biomethane produced, approximately 850 tons/years, is injected into the national gas grid or supplied to gas stations. In the proposed plant, a solar field of an evacuated tube collector having a surface of approximately 200 m2 is able to satisfy 35% of the thermal energy demand while over 50% of the electric demand is met with a photovoltaic field of 400 m2. A promising payback time of approximately 5 years was estimated.

Energetic, exergetic analysis and machine learning of methane chlorination process for methyl chloride production

Improving energy efficiency in ammonia production plants using machine learning

Numerical simulation and 4E analysis of a steam methane reforming-based multi heat recovery process, producing electricity, methanol, fresh water, heating, and coolant

A Polygeneration Process for Heat, Power and DME Production by Integrating Gasification with CHP Plant : Modelling and Simulation Study

Machine learning based predictive model for methanol steam reforming with technical, environmental, and economic perspectives

Towards a sustainable, and economic production future: Proposing a new process for methanol production based on renewable hydrogen

Machine Learning Optimization and 4E Analysis of a CCHP System Integrated into a Greenhouse System for Carbon Dioxide Capturing

Exergy analysis of methanation process based on Aspen Plus simulation

Simulation and exergoeconomic analysis of a dual-gas sourced polygeneration process with integrated methanol/DME/DMC catalytic synthesis

Exergy Analysis and Multi-Objective Optimisation for Energy System: a Case Study of a Separation Process in Ethylene Manufacturing

Production of Sustainable Methane from Renewable Energy and Captured Carbon Dioxide with the Use of Solid Oxide Electrolyzer: A Thermodynamic Assessment

A renewable multigeneration system based on biomass gasification and geothermal energy: Techno-economic analysis using neural network and Grey Wolf optimization

Modeling, validation and exergy evaluation of a thermally-integrated industrial cryogenic air separation plant in Colombia

Thermodynamic and exergoeconomic analysis of a proton exchange membrane fuel cell/absorption chiller CCHP system based on biomass gasification

Multifactor Performance Evaluation of an Energy-Saving Methanol Production Process Coupled Refrigeration-Power System Driven by Waste Heat

Dynamic Simulation and Thermoeconomic Analysis of a Novel Hybrid Solar System for Biomethane Production by the Organic Fraction of Municipal Wastes

Exergoenvironmental analysis of methanol production by steam reforming and autothermal reforming of natural gas

Optimization and Analysis of an Integrated Liquefaction Process for Hydrogen and Natural Gas Utilizing Mixed Refrigerant Pre-Cooling

Exergy Analysis of MCFC/MGT Hybrid Power System

Hybrid Prediction-Driven High-Throughput Sustainability Screening for Advancing Waste-to-Dimethyl Ether Valorization

On-design and off-design performance analysis of a hybrid MCFC-Micro gas turbine system using the exergy method