Abstract:Duplex stainless steels (DSS) have a structure composed of austenite and ferrite in approximately equal volume fractions which provides an excellent integration between mechanical properties and corrosion resistance. However, the formation of intermetallic phases, such as sigma (σ) phase could become a major problem, once a small percentage of this phase originates a drastic deterioration of toughness and ductility, phenomenon known as σ phase embrittlement. In the present work, the effect of the isothermal aging treatment at 800 °C (temperature in which σ phase can be formed) on the degradation of mechanical properties of UNS S31803 DSS was investigated. The results showed that σ phase precipitation occurred regularly and by eutectoid decomposition. The effect of sigma phase on the mechanical properties was analyzed by the microhardness and impact tests at room temperature. The assessment of DSS also includes an σ phase embrittlement monitoring alternative method based on the electromechanical impedance (EMI), using piezoelectric sensors. The basic idea of the σ phase embrittlement monitoring method is that the increase in the hardness and the decrease in the impact toughness will leads to the variation in the EMI signatures by modifying structural stiffness. The proposed methodology is evaluated using the impedance module (|Z|), resistance (R), reactance (X) and by the statistical indexes: Relative Variation of Natural Frequencies (RVNF) and Root Mean Square Deviation (RMSD). This method is considered a nondestructive test, presents accurate results with high sensitivity and reliability providing capacity of determining sigma phase embrittlement and has promising application potential in this and other materials.

DL-EPR vs. LSV-KOH: from simple detection of deleterious phases to analysis of morphology and high accuracy on determination of sigma phase in UNS S32750 stainless steel

Experimental review and accuracy of etchants used for phase analysis of SAF 2507 Super Duplex Stainless Steel

Application of the Modified Electrochemical Potentiodynamic Reactivation Method to Detect Susceptibility to Intergranular Corrosion of a Newly Developed Lean Duplex Stainless Steel LDX2101

Evaluation of intergranular corrosion susceptibility of UNS S31803 duplex stainless steel with an optimized double loop electrochemical potentiokinetic reactivation method

Evaluation of the Susceptibility to Intergranular Attack of 2205 Duplex Stainless Steel by Dl-Epr Method

Influence of o-phase on mechanical properties and corrosion resistance of duplex stainless steels

Detecting the Sigma Phase in Duplex Stainless Steel by Magnetic Noise and First Harmonic Analysis

Evaluation of Aged Duplex Stainless Steel UNS S32750 Susceptibility to Intergranular Corrosion by Optimized Double Loop Electrochemical Potentiokinetic Reactivation Method

Application of electromechanical impedance technique in the monitoring of sigma phase embrittlement in duplex stainless steel

Investigation of Selective Corrosion Resistance of Aged Lean Duplex Stainless Steel 2101 by Non-Destructive Electrochemical Techniques

In Situ Observation of Surface Electrochemical Activities of Lean Duplex Stainless Steel LDX 2101

Detecting Critical Crevice Temperature for Duplex Stainless Steels in Chloride Solutions

Studies on the degree of sensitization of hyper-duplex stainless steel 2707 at 900C using a modified DL-EPR test

Influence of microstructure on the corrosion resistance of the duplex stainless steel UNS S31803

Investigation on Ultra-Pure Ferritic Stainless Steel 436L Susceptibility to Intergranular Corrosion Using Optimised Double Loop Electrochemical Potentiokinetic Reactivation Method

Phase quantification in a duplex stainless steel welds using NDT techniques

In situ evaluation of sensitization in the heat affected zone of supermartensitic stainless steel welded with superduplex filler metal

Electrochemical characterization of 13Cr low-carbon martensitic stainless steel - corrosion study with a mini-cell setup

Effect of Secondary Phase on Passivation Layer of Super Duplex Stainless Steel UNS S 32750: Advanced Safety of Li-Ion Battery Case Materials

Electrochemical dissolution behavior of stainless steels with different metallographic phases and its effects on micro electrochemical machining performance

Combining low-loss EELS experiments with machine learning-based algorithms to automate the phases separation imaging in industrial duplex stainless steel