Abstract:The systems responsible for mooring floating structures possess a pivotal function in ensuring safety. During harsh marine conditions, mooring systems can be susceptible to failure due to two key factors: mooring line snap tension and out-of-plane loading of the anchor. However, in contemporary mooring designs, these two factors do not receive sufficient contemplation. This paper recommends a safety design strategy for mooring system, which considers both the mooring line snap tension and the out-of-plane loading of the anchor. The analysis of partial mooring line breakage during extreme marine conditions is conducted to elicit insights into the characteristics of floating platform movement, variations in mooring line tension, and the implications of out-of-plane loading on the mooring anchor post breakage. The evolution process of the safety factor is deduced accordingly. The findings reveal that the tensions of adjacent lines experience an abrupt surge when a line is broken, leaving behind the possibility of progressive failure. Due to the vast drift of the floating platform, the adjacent anchors are also troubled by out-of-plane loadings, which dramatically reduce the anchor capacity. This indicates the coupling effect of the mooring line snap tension and the out-of-plane loading as the primary source of failure of the remaining mooring system. The paper emphasizes the significance of factoring in mooring line snap tension and anchor out-of-plane loading capacity verification in anchor design.

Dynamic motion response of an oil tanker moored with a single buoy under different mooring system failure scenarios

Features of Dynamism Wharf-Cable-Dynamic-Positioning Vessel Rigid-Flexible Coupling Multi-Body System Analysis

Dynamic Analysis of Full-Circle Swinging Hoisting Operation of a Large Revolving Offshore Crane Vessel under Different Wave Directions

A Hydrodynamical Study on Motions and Mooring Loads of the Small Scale LNG Carrier

Experimental Investigation on Responses Characteristics of a Mooring Line with Imposed Top-End Motions

Numerical Assessment on the Dynamic Behaviour of Submarine Hoses Attached to CALM Buoy Configured as Lazy-S under Water Waves

Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line

Quasi-Static Analysis Of The Multi-Component Mooring Line For Suction Anchors

Dynamic Response of an Offshore Floating Wind Turbine at Accidental Limit States—Mooring Failure Event

Quasi-Static Analysis of the Multicomponent Mooring Line for Deeply Embedded Anchors

Dynamic Analysis of a Symmetrically Moored Semisubmersible Under Various Possible Mooring Combinations

Investigations on the Mooring Safety Considering the Coupling Effect of the Mooring Line Snap Tension and Anchor Out-of-plane Loading

Prediction of the whole mooring chain reaction to cyclic motion of a fairlead

Dynamic response analysis of a fully coupled aerodynamic-hydrodynamic-mooring-anchor floating offshore wind turbine

Investigation on Hydrodynamic Characteristics, Wave-Current Interaction and Sensitivity Analysis of Submarine Hoses Attached to a CALM Buoy

The dynamic response analysis of the equivalent water depth truncated point of the mooring line

Strength of submarine hoses in Chinese-lantern configuration from hydrodynamic loads on CALM buoy

Dynamic analysis of a 5 MW Barge-type FOWT with two-mooring failure of wind-wave misalignment scenarios

Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration:OMAE2019‑96755

Numerical Studies on CALM Buoy Motion Responses and the Effect of Buoy Geometry Cum Skirt Dimensions with Its Hydrodynamic Waves-Current Interactions

Motion Responses of a Berthed Tank under Resonance Coupling Effect of Internal Sloshing and Gap Flow