Abstract:It is increasingly popular to use Computational Fluid Dynamics (CFD) models to study floating structures subjected to ocean waves, especially when it comes to applications of floating offshore wind turbines and Wave Energy Converters (WECs). Mooring dynamics are currently lacking in most of these applications. This paper presents a coupled simulation study of moored floating body motion by coupling two open-source libraries: a finite volume CFD toolbox, OpenFOAM, and a lumped-mass mooring model, MoorDyn. The instantaneous floating body position and velocity are passed from the body motion solver in the CFD model to the mooring model to calculate the fairlead kinematics. The mooring reaction forces, which are calculated by MoorDyn after updating the mooring system states, are then returned to the body motion solver to update the floating body motion. Both mesh deformation and overset mesh methods are used as the mesh motion solver in the CFD model to account for the floating body motion. The coupled model was validated against experimental measurements for a floating box moored with four catenary lines under the action of regular waves, which came from a preliminary test campaign for WECs. Apart from the lumped-mass mooring model, the present work also coupled a quasi-static mooring model and a finite element model with the floating body motion solver in OpenFOAM. The mooring line tensions predicted by these models were compared. The coupled model equipped with three mooring line codes may be further used to carry out survivability studies of FOWTs and WECs subject to severe sea states.

Numerical Studies on CALM Buoy Motion Responses and the Effect of Buoy Geometry Cum Skirt Dimensions with Its Hydrodynamic Waves-Current Interactions

Numerical Assessment on the Dynamic Behaviour of Submarine Hoses Attached to CALM Buoy Configured as Lazy-S under Water Waves

Experimental Study on Motion Characterisation of CALM Buoy Hose System under Water Waves

Understanding the Fluid–structure Interaction from Wave Diffraction Forces on CALM Buoys: Numerical and Analytical Solutions

Structural Design And Analysis Of Small Waterplane Area Buoy

Investigation on Hydrodynamic Characteristics, Wave-Current Interaction and Sensitivity Analysis of Submarine Hoses Attached to a CALM Buoy

A Hydrodynamical Study on Motions and Mooring Loads of the Small Scale LNG Carrier

Strength of submarine hoses in Chinese-lantern configuration from hydrodynamic loads on CALM buoy

Numerical modelling on effect of loading rate on uplift behavior of suction caissons

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Oscillatory Responses of a Spatially Random Seabed in the Vicinity of Structures: Validation and Application of the Integrated CFD-SFEM

Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration:OMAE2019‑96755

Dynamic motion response of an oil tanker moored with a single buoy under different mooring system failure scenarios

Research on cable dynamic response of a catenary anchor leg mooring system based on ANCF

The Design of a Novel Small Waterplane Area Pillar Buoy Based on Rolling Analysis

Effects of a Multi-Segment Mooring System Using Buoy and Clump Weights on Motions of the Oc-4 Deepcwind Wind Turbine System under Wind and Waves

Numerical investigation of dynamic soil response around a submerged rubble mound breakwater

Numerical Study of the Interaction Between an Internal Solitary Wave and a Submerged Extended Cylinder Using OpenFOAM

CFD simulation of floating body motion with mooring dynamics: Coupling MoorDyn with OpenFOAM

Quasi-static Three-Dimensional Analysis of Suction Anchor Mooring System

Mathematical Modelling of Bonded Marine Hoses for Single Point Mooring (SPM) Systems, with Catenary Anchor Leg Mooring (CALM) Buoy Application—A Review