Abstract:It was discussed that the research progress and technical achievements had been obtained in the field of residual stress measurement and control of high-grade and large-diameter welded pipe for oil and gas transportation in China. (1) The layout scheme of measuring points and the requirements of spaces between measuring points, hole depth, etc., for residual stress measurement of welded pipe using hole drilling strain-gage method were proposed. On which, the residual stress measurement technology for welded pipe was proposed. (2) The measurement results indicate that the characteristics and distribution of residual stress of SAWH pipes with different grades and sizes were quite different. In general, the residual stress of SAWH pipe was highest, followed by JCOE pipe and UOE pipe. After the ring splitting test, SAWH pipe section usually had relative displacement in circumferential, axial and radial directions, and the degree of deformation varies greatly; But SAWL pipe section usually only occurs circumferential opening, without axial and radial stagger, and the circumferential opening of JCOE pipe was usually larger than that of UOE pipe. (3) Based on the mechanical analysis of the complex deformation of SAWH pipe after the ring splitting test and the superposition principle of elastic mechanics, a prediction model of the residual stress of the high-grade and large-diameter welded pipe suitable for SAWH pipe was established, which overcame the deficiency of the existing prediction models of the residual stress of the welded pipe only considering the circumferential deformation. (4) The key forming parameters affecting the residual stress of SAWH pipe were analyzed and determined as the reduction and forming angle. Combined with the finite element simulation analysis, field adjustment and residual stress analysis, the forming technology and residual stress control technology of low residual stress SAWH pipe were developed.

Deformation mechanism analysis of three-roller continuous and synchronous calibration process of straightness and roundness for LSAW pipes

Continuous and synchronous calibration process of ovality and straightness for longitudinally submerged arc welding pipes with three rollers

Analysis of three-roller continuous and synchronous calibration process of straightness and ovality for large thin-walled pipes considering the weld

Simulation and Analysis of UOE Pipe Production Processing by Three-Dimensional Finite Element Method

Reverse Deformation Design for Bending Control in Welding of Ring Stiffeners

Design and Finite Element Analysis of High Efficiency and High Precision Centering Device for Ship Pipe Welding

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

A theoretical model for roller-shape design of three-roller continuous and synchronous calibration process of ovality and straightness for large thin-walled pipes

Numerical simulation of bending deformation induced by multi-seam welding of a steel-pipe structure

Analysis and mitigation of the bending deformation in girth-welded slender pipes with numerical modelling and experimental measurement

Two-Roller Continuous Calibration Process by Compression for Submarine Pipelines

Intelligent Control System of Internal Expansion over Bending and Calibration (IEOBC) Process for Large Pipe Ends

Mechanical study on overbend segment of submarine pipeline during S-Lay

Insight into deformation allocation in the multi-pass roll forming of a double-walled brazed tube

Technology Optimization Analysis of Three-Roll Rotary Piercing Process for Seamless Steel Pipe

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Finite element synthesized analysis of the forming process of spiral welded pipe

Study on FEM Numerical Simulation Method for the Welding Distortion

Structural strength analysis of curved submarine pipes during pipeline connection

Measurement and Control of Residual Stress of High-Grade and Large-Diameter Welded Pipe for Oil and Gas Transportation