Capacitive removal of Pb ions via electrosorption on novel willow biochar–manganese dioxide composites

Kalyani Mer,Nosa O. Egiebor,Wendong Tao,Baharak Sajjadi,Udani K. Wijethunga,Gyu Leem
DOI: https://doi.org/10.1080/09593330.2022.2135028
IF: 3.475
2022-10-25
Environmental Technology
Abstract:Biochar derived from lignocellulosic biomass has been used as a low-cost adsorbent in wastewater treatment applications. Due to its rich porous structure and good electrical conductivity, biochar can be used as a cost-effective electrode material for capacitive deionization of water. In this work, willow biochar was prepared through carbonization of shrub willow chips, activated with potassium hydroxide, and loaded with manganese dioxide (WBC-K-MnO 2 nanocomposite). The prepared materials were used to electrochemically adsorb Pb 2+ from aqueous solutions. Under the applied potential of 1.0 V, the WBC-K-MnO 2 electrode exhibited a high Pb 2+ specific electrosorption capacity (23.3 mg/g) as compared to raw willow biochar (4.0 mg/g) and activated willow biochar (9.2 mg/g). KOH activation followed by MnO 2 loading on the surface of raw biochar enhanced its BET surface area (178.7 m 2 /g) and mesoporous volume ratio (42.1%). Moreover, the WBC-K-MnO 2 nanocomposite exhibited the highest specific capacitance value of 234.3 F/g at a scan rate of 5 mV/s. The electrosorption isotherms and kinetic data were well explained by the Freundlich and pseudo-second order models, respectively. The WBC-K-MnO 2 electrode demonstrated excellent reusability with a Pb 2+ electrosorption efficiency of 76.3% after 15 cycles. Thus, the WBC-K-MnO 2 nanocomposite can serve as a promising candidate for capacitive deionization of heavy metal contaminated water. GRAPHICAL
environmental sciences
What problem does this paper attempt to address?