Abstract:Background Boron neutron capture therapy (BNCT) is a next‐generation radiotherapy, utilizing both an external neutron beam and a 10B ‐containing pharmaceutical. A compact accelerator for a high intensity neutron source was installed to conduct BNCT in a hospital. The dose administered to a patient was evaluated by measuring the proton beam current. Purpose Neutron intensity should be monitored in real‐time by measuring the neutrons emitted from the target during BNCT irradiation. This is crucial due to potential neutron target degradation. Online neutron beam monitoring systems are required for reliable measurements of the administered neutron dose. An online neutron beam monitoring system was developed to monitor neutron intensity irradiating on the patient at the National Cancer Center Hospital (NCCH). Methods The neutron detector comprised a back‐illuminated thin Si diode of 40‐μm thickness and an ultrathin natural LiF neutron converter of 0.05‐μm thickness. The neutron detector was installed on the neutron target unit, regardless of whether a patient was present, without any additional modifications to the setup. The response functions for high photon dose rates of upto 100 Gy/h were measured. The pulse heights were measured using the neutron beam monitor during BNCT neutron irradiation. Neutron temporal response measured using the online beam monitor was acquired and compared with the proton beam current and the measurements at a patient position. From this measurement at the patient position, the neutron fluence rate irradiating on a patient was obtained. Results The neutron events were separated from the photon events. The neutron counting rates increased rapidly with the starting of proton beam irradiation and dropped to zero upon its termination. During intermittent drops and recoveries in the proton beam, the neutron beam monitor for counting rates responded quickly, synchronizing with the beam current. A scatter plot of the neutron counting rate and proton beam current indicated a good linear correlation. A direct relationship between the online neutron beam monitor's neutron counting rates and those of the patient neutron detector showed a good correlation coefficient of 0.84. A ratio of the both neutron counting rates showed a standard deviation of 6%. The correlation coefficient and standard deviation were improved to 0.94 and 1.5%, by re‐binning the neutron temporal response with longer acquisition period than 1 s. Using the online neutron beam monitor, the neutron fluence rate was obtained from the direct relationship within 1.5%. Therefore, real‐time monitoring of neutron intensity was achieved within the acceptable level as per the International Commission on Radiation Units and Measurements report. Conclusions The online neutron beam monitoring system was developed to monitor the BNCT neutron beam intensity at NCCH. The temporal response of the neutron beam monitor was synchronized with the neutron counting rate at the patient position. Using the online neutron beam monitor, the neutron fluence rate irradiating on the patient can be monitored from the direct relationship. Fluctuation of the neutron beam intensity through BNCT irradiation and the degradation of the lithium target through the lifespan of the neutron target could be monitored using the neutron beam monitor.

Evaluation of depth-dose profiles in a water phantom at the BNCT facility at BINP

Development of a tomographic system for online dose measurements in BNCT (Boron Neutron Capture Therapy)

A noninvasive dose estimation system for clinical BNCT based on PG-SPECT--conceptual study and fundamental experiments using HPGe and CdTe semiconductor detectors

A feasibility study using an array of LaBr3(Ce) scintillation detectors as a Compton camera for prompt gamma imaging during BNCT

Geant4 beam model for boron neutron capture therapy: investigation of neutron dose components

Studies of phantom-solution systems for boron neutron capture therapy

Preliminary Monte Carlo simulations of a SPECT system based on CdZnTe detectors for real time BNCT dose monitoring

Design of Photon Spectrometer for Boron Neutron Capture Therapy Treatment Beam

Effect of neutron beam properties on dose distributions in a water phantom for boron neutron capture therapy

A new approach to dose estimation and in-phantom figure of merit measurement in BNCT by using artificial neural networks

Accurate gamma-ray dose measurement up to 10 MeV by glass dosimeter with a sensitivity control filter for BNCT

Gamma dose measurement in a water phantom irradiated with the BNCT facility at THOR

Study of the thermal neutron activation of a gamma-ray detector for BNCT dose monitoring

Design of SPECT for BNCT to measure local boron dose with GAGG scintillator

Microdosimetric quantities of an accelerator-based neutron source used for boron neutron capture therapy measured using a gas-filled proportional counter

Thickness-dependent neutron detection efficiency of LiF-Si-based active neutron detector for boron neutron capture therapy

Development of an online neutron beam monitoring system for accelerator‐based boron neutron capture therapy in a hospital

Use of a Xenon Gamma Spectrometer for Dosimetry in Boron–Neutron Capture Therapy

Real-Time Boron Concentration Measurement in BNCT Using Compton Imaging

Microdosimetric intercomparison of BNCT beams at BNL and MIT

Measurement of Time Resolution of Scintillation Detectors with EQR-15 Silicon Photodetectors for the Time-of-Flight Neutron Detector of the BM@N Experiment