Abstract:Radon and other alpha-emitting nuclides in air can be a significant risk for health hazards in the workplace and in dwellings. Radon gas in US homes causes over 21,000 deaths from lung cancer annually, according to the US Environmental Protection Agency (US EPA). Alpha-emitting radionuclides from airborne contamination in the nuclear industry also constitute a known safety and security-safeguards related issue. Purdue University, along with Sagamore Adams Laboratories LLC, have developed the tensioned metastable fluid detector (TMFD) sensor technology for general-purpose alpha-neutron-fission. For radon detection, radon gas in air is sparged through the TMFD detection fluid, after which this radon-bearing fluid is placed into a tensioned metastable state. In this metastable state, an audible-visible cavitation (alpha radiation) detection event is created and electronically recorded. Tailoring the level of tension enables spectroscopic information through energy discrimination of radon and its progeny; This is also applicable to other alpha emitting isotopes (Pu, Cm, U…). TMFDs boast high intrinsic detection efficiencies (>95%) for alpha spectroscopy while remaining blind to background beta and gamma radiation even in ~10 R h fields. The immunity to beta and gammas allows for reusability of the detection fluid through immunity to beta buildup from thoron and radon progeny. TMFD technology was used to measure the concentration of radon and radon progeny in air for concentrations from 74 Bq m to 740 Bq m. The system measures radon concentration between these levels within 24 h with an intrinsic relative error (IRE) of ± 15% according to the standards set forth by the American Association of Radon Scientists and Technicians-National Radon Proficiency Program (AARST-NRPP) Device Evaluation Program (DEP). Precision evaluation defined using the relative standard deviation set by the AARST-NRPP measured a deviation of <5%, which exceeds the requirement of <25%. Temperature effects from 10°C and 27°C were assessed and corrected for dynamically. A radon decay correction method was introduced to correct for the radon activity decrease in the detection fluid over the counting period due to the ~3.8 d half-life. Blind testing was also successfully performed* with standards from the ; within 6 h, the TMFD-based technology accurately measured the concentration of radon to within 20% of the reference standards. Non-condensing relative humidity levels up to 95% per AARST-NRPP were assessed for and were found to have no impact on radon detection. This work improves upon the previous work by splitting the calibration curve into two distinct regions and adds additional information pertaining to the effects of relative humidity on the system.

Real-Time Inventory Change Detection for the Protactinium Decay Inventory of the Molten Salt Breeder Reactor

Novel Calibration Approach for Monitoring Aerosol Hydrogen Isotopes Using Laser-Induced Breakdown Spectroscopy for Molten Salt Reactor Off-Gas Streams

Antineutrino Monitoring of Thorium Reactors

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Detection of Anomalous Reactor Activity Using Antineutrino Count Rate Evolution Over the Course of a Reactor Cycle

Modeling of fission and activation products in molten salt reactors and their potential impact on the radionuclide monitoring stations of the International Monitoring System

Spent fuel nondestructive assay integrated characterization from active neutron, passive neutron, and passive gamma

Nuclear data evaluation for decay heat analysis of spent nuclear fuel over 1–100 k year timescale

Management of nuclear materials containing natural uranium and thorium salts

Primary measurement of massic activity of Am-241 by cryogenic decay energy spectrometery

New approach of a transient ICP-MS measurement method for samples with high salinity

Real-Time Elemental and Isotopic Measurements of Molten Salt Systems through Laser-Induced Breakdown Spectroscopy

An instrument for continuous measurement of 220Rn (and 222Rn) using delayed coincidences between 220Rn and 216Po

A novel method of identification of in-ring decay and its application in the half-life estimates of 94mRu44

Radon and Progeny Detection Using Tensioned Metastable Fluid Detectors

First observation of a reactor-status effect on the beta+ decay rate of 22Na

Quantification of Lanthanides in a Molten Salt Reactor Surrogate Off-Gas Stream Using Laser-Induced Breakdown Spectroscopy

Reactors as a source of antineutrinos: the effect of fuel loading and burnup for mixed oxide fuels

Precise measurement of the 222Rn half-life: a probe to monitor the stability of radioactivity

Gamma and neutron detector performance in a MOX fuel fabrication plant environment