Abstract:The management of municipal and industrial organic solid wastes has become one of the most critical environmental problems in modern societies. Nowadays, commonly used management techniques are incineration, composting, and landfilling, with the former one being the most common for hazardous organic wastes. An alternative eco-friendly method that offers a sustainable and economically viable solution for hazardous wastes management is fast pyrolysis, being one of the most important thermochemical processes in the petrochemical and biomass valorization industry. The objective of this work was to study the application of fast pyrolysis for the valorization of three types of wastes, i.e., petroleum-based sludges and sediments, residual paints left on used/scrap metal packaging, and creosote-treated wood waste, towards high-added-value fuels, chemicals, and (bio)char. Fast pyrolysis experiments were performed on a lab-scale fixed-bed reactor for the determination of product yields, i.e., pyrolysis (bio)oil, gases, and solids (char). In addition, the composition of (bio)oil was also determined by Py/GC-MS tests. The thermal pyrolysis oil from the petroleum sludge was only 15.8 wt.% due to the remarkably high content of ash (74 wt.%) of this type of waste, in contrast to the treated wood and the residual paints (also containing 30 wt.% inorganics), which provided 46.9 wt.% and 35 wt.% pyrolysis oil, respectively. The gaseous products ranged from ~7.9 wt.% (sludge) to 14.7 (wood) and 19.2 wt.% (paints), while the respective solids (ash, char, reaction coke) values were 75.1, 35, and 36.9 wt.%. The thermal (non-catalytic) pyrolysis of residual paint contained relatively high concentrations of short acrylic aliphatic ester (i.e., n-butyl methacrylate), being valuable monomers in the polymer industry. The use of an acidic zeolitic catalyst (ZSM-5) for the in situ upgrading of the pyrolysis vapors induced changes on the product yields (decreased oil due to cracking reactions and increased gases and char/coke), but mostly on the pyrolysis oil composition. The main effect of the ZSM-5 zeolite catalyst was that, for all three organic wastes, the catalytic pyrolysis oils were enriched in the value-added mono-aromatics (BTX), especially in the case of the treated wood waste and residual paints. The non-condensable gases were mostly consisting of CO, CO2, and different amounts of C1–C4 hydrocarbons, depending on initial feed and use or not of the catalyst that increased the production of ethylene and propylene.

Green Catalytic Pyrolysis: An Eco-Friendly Route for the Production of Fuels and Chemicals by Blending Oil Industry Wastes and Waste Furniture Wood

Catalytic Fast Pyrolysis of Lignocellulosic Biomass: Recent Advances and Comprehensive Overview

Valorization of Hazardous Organic Solid Wastes towards Fuels and Chemicals via Fast (Catalytic) Pyrolysis

Catalytic Pyrolysis of Biomass and Polymer Wastes

Co-pyrolysis of furniture wood with mixed plastics and waste tyres: assessment of synergistic effect on biofuel yield and product characterization under different blend ratio

Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries

Pyrolysis-catalytic upgrading of bio-oil and pyrolysis-catalytic steam reforming of biogas: a review

Valorisation of biomass pellets to renewable fuel and chemicals using pyrolysis: characterisation of pyrolysis products and its application

Catalytic pyrolysis of biomass for biofuels production

Conversion of Mixed Waste Plastic into Fuel Oil Production from Pyrolysis

Catalytic Pyrolysis of Lignocellulosic Biomass for Production of Liquid Biofuels

Effective deoxygenation for the production of liquid biofuels via microwave assisted co-pyrolysis of agro residues and waste plastics combined with catalytic upgradation

Biorefinery via Catalytic Upgraded Fast Pyrolysis of Biomass

Co-pyrolysis of refinery oil sludge with biomass and spent fluid catalytic cracking catalyst for resource recovery

Aromatic rich biofuel production via catalytic co‐pyrolysis of paulownia wood and polypropylene waste

Novel Staged Free-Fall Reactor for the (Catalytic) Pyrolysis of Lignocellulosic Biomass and Waste Plastics

Advancements and challenges in the production of low-carbon fuels via catalytic fast pyrolysis of biomass through refinery integration and co-product generation

Influence of Catalyst on the Yield and Quality of Bio-Oil for the Catalytic Pyrolysis of Biomass: A Comprehensive Review

Gas and Liquid Fuel Production from Non-edible/Unutilized Biomass by Catalytic Conversion

Valorization of Hazardous Materials along with Biomass for Green Energy Generation and Environmental Sustainability through Pyrolysis

Sustainable valorization of waste keyboard keys via microwave assisted pyrolysis over Fe-Ni doped green catalyst towards clean fuel production