Abstract:In this research, we synthesized new organic dyes, called BS-1–8, based on acrylamide/2-pyridone for use in dye-sensitized solar cells (DSSCs). These dyes were designed with a D-π-A configuration and underwent molecular engineering to fine-tune their spectral properties and energy levels. Through a comprehensive analysis combining experimental and theoretical approaches, we investigated various aspects of these dyes, including their optical, electrochemical, photovoltaic, geometrical, and electronic features. The newly developed dyes exhibited strong absorption in the UV–visible range, characterized by high molar extinction coefficients. Upon sensitization with BS-1–8, the efficiency of DSSCs ranged from 2.83 % to 5.01 %. Acrylamide-based sensitizers (BS-1–4) achieved efficiencies ranging from 3.82 % to 5.01 %, while 2-pyridone-based sensitizers (BS-5–8) scored between 2.83 % and 3.57 %. Notably, when co-sensitized with N719 at concentrations of 0.2–0.3 mM, the DSSCs showed a significant increase in power conversion efficiencies ( PCEs ) ranging from 7.85 % to 9.01 %, compared to 7.50 % for DSSCs sensitized with N719 alone. Specifically, the performance of 0.2 mM BS-4 was 20 % better than that of N719. This improvement in PCEs can be attributed to the enhanced Voc (open-circuit voltage) achieved through co-sensitization, highlighting the potential benefits of using sensitizers to develop more efficient DSSCs. The highest achieved PCE was 9.01 %, accompanied by a Jsc (short-circuit current density) of 20.07 mA.cm −2 and a Voc of 0.732 V for the mixed co-sensitizers (0.2 mM BS-4 + 0.2 mM N719). These findings indicate that the combination of co-sensitization is a promising strategy for developing efficient D-π-A-type sensitizers and evaluating DSSC performance. Additionally, the study of incident photon-to-current efficiency ( IPCE ) and electrochemical impedance spectroscopy (EIS) provided insights into the mechanisms contributing to these improvements. Overall, these results suggest that BS-1–8 sensitizers have significant potential for advancing the development of more efficient DSSCs.

Simultaneous effect of activated carbon and chlorophyll pigment from leaves of acacia nilotica on the enhancement of electron transfer in DSSC applications

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Synergetic impact of natural light harvesting materials to reduce the recombination rate and improve the device performance of dye sensitized solar cells

Lignite-derived nanocarbon as surface passivator and cosensitizer in dye-sensitized solar cell

Large Enhancement of Dye Sensitized Solar Cell Efficiency by Co-sensitizing Pyridyl- and Carboxylic Acid-Based Dyes

Effect of modified titanium dioxide photoanode and agarose gel electrolyte on electrochemical studies of dye-sensitized solar cell

An analysis of the dye-sensitized solar cells fabricated with the dyes extracted from the leaves and flowers of Amaranthus cruentus

Fabrication and performance analysis of set standard natural dye-sensitized solar cell (N-DSSC) using extracted Terminalia kattapa (Red), Azadirachia indica (Green), and Clitoria ternatea (Blue) dyes with virgin Degussa p25 photo-anode

Exploring the potential of natural dyes in DSSCs: Innovations for efficient light harvesting and charge separation through Co-sensitization

Boosting DSSC efficiency via acid-base co-sensitization with N-1 dye

Lotus Leaf Derived Natural Dye As Sensitizer and Biochar As Counter Electrode for Dye-Sensitized Solar Cells

Amplifying performance through co-sensitization of Acrylamide/2-Pyridone dyes in DSSCs

A Co-Sensitized Approach to Efficiently Fill the Absorption Valley, Avoid Dye Aggregation and Reduce the Charge Recombination

Innovating dye-sensitized solar cells through novel microalgal and cyanobacterial species extricated dyes: A sustainable tack for material scarce earth

Performance of Natural Dye Extracted from Annatto, Black Plum, Turmeric, Red Spinach, and Cactus as Photosensitizers in TiO2NP/TiNT Composites for Solar Cell Applications

The improved performance of dye‐sensitized solar cells using co‐sensitization and polymer gel electrolyte

TiO2-Ag AND NATURAL DYE CO-PIGMENTED WITH SALICYLIC ACID FOR DYE-SENSITIZED SOLAR CELL (DSSC) APPLICATION

Improved the DSSCs performance by sensitizing eight natural dyes and varying the annealing process on the TiO2

Cyanoacetamide co-sensitizers DY-1 and DY-2: Unveiling a promising path to highly efficient photovoltaic devices

Enhanced visible light harvesting in dye-sensitized solar cells through incorporation of solution-processable silver plasmons and anthracite-derived graphene quantum dots