Abstract:Recently, with rapid development of perovskite solar cells, the record efficiency has exceeded 24.2%. However, the research of efficiency improvement never stops. This work introduces an effective approach to remarkably reduce the device reflection loss by using light management (LM) cover layer. A specific model combined with ray and wave optics was built to numerically optimize the texture of the LM layers for light harvesting in photovoltaics cells and explore the optical principles in the light trapping. The LM layer texture is made of 2D periodic triangle structures. Both symmetric and asymmetric triangle structures were investigated. The results indicate that asymmetric structures possess the close performance compared with symmetric ones, and notably, on contrary to the symmetric structures, the light trapping abilities are much more insensitive to the bottom thicknesses of asymmetric structures. It will benefit the practical fabrication, since the precise bottom thickness control can be avoided. From the optimization results, 3 optimal structures are found. With the optimal LM layers, a thin active layer (165nm) device is able to produce the short circuit current intensities (Jsc) of around 21mA/cm2, which is approximately equivalent to the Jsc of a thick active layer (800nm) device without LM layers. Meanwhile, about 23% power conversion efficiency (PCE) enhancement is achieved. On the other hand, active layer thickness also makes influence on the light trapping abilities. As the active layer thickness is increased from 165nm to 800nm, the Jsc only improves by about 2.4mA/cm2, while the PCE enhancement is dropped from ~23% to ~11%. In consideration of the compromise between total device energy output and PCE enhancement, as well as material cost reduction, the active layer with around 165nm should be an optimal thickness.

Enhanced performance of ultrathin n-i-p and p-i-n perovskite solar cells via light trapping: A simulation study employing Lambertian back reflector

Light-Trapping Electrode for the Efficiency Enhancement of Bifacial Perovskite Solar Cells

Light absorption enhancement in ultrathin perovskite solar cells using plasmonic light trapping and bionic anti-reflection coating

Integration of Self-Assembled Porous Alumina and Distributed Bragg Reflector for Light Trapping in Si Photovoltaic Devices

Novel back-reflector architecture with nanoparticle based buried light-scattering microstructures for improved solar cell performance

Enhancing perovskite solar cell performance through PbI2 in situ passivation using a one-step process: experimental insights and simulations

Efficient Light Management In Narrow-Bandgap Perovskite Solar Cells

Optimization of Light Management Layers for Light Harvest of Perovskite Solar Cells.

Numerical Study on Overcoming the Light-Harvesting Limitation of Lead-Free Cs2AgBiBr6 Double Perovskite Solar Cell Using Moth-Eye Broadband Antireflection Layer

Light Trapping Concepts for Enhanced Absorption in Thin Silicon Solar Cells

Efficient Light Trapping Structure in Thin Film Silicon Solar Cells

Enhanced Efficiency in Thin Film Solar Cells: Optimized Design With Front Nanotextured and Rear Nanowire-Based Light Trapping Structure

Coordinating light management and advance metal nitride interlayer enables MAPbI3 solar cells with >21.8% efficiency

Enhancing light trapping for improved efficiency of perovskite solar cells: design and analysis

Simulation of Carbon-Based Perovskite Solar Cell Using PBS-TBAI as a Hole Transport Layer (HTL)

Enhancement in MAPbI[math]Clx-based perovskite solar cell performance using numerical simulation

Beyond Light‐Trapping Benefits: the Effect of SiO2 Nanoparticles in Bifacial Semitransparent Ultrathin Cu(In,Ga)Se2 Solar Cells

Efficient Micrometer Thick Bifacial Perovskite Solar Cells

Collaborative Management of Light‐Absorbing Supplementation and Defect Passivation Based on Green‐Emitting ((ch3)4n)2(c2h5)4n·mnbr4 Single Crystals for Efficient and Stable Inverted Perovskite Solar Cells

Plasmonic light trapping in thin-film silicon solar cells with improved self-assembled silver nanoparticles.

Nanotextured highly efficient optical and light trapping strategies using efficient hole transport-free structure for perovskite solar cells