Abstract:A 5-DoF fully parallel machining robot (PMR) with attitude coupling motion property holds the potential to realize the high-efficiency and high-quality machining of complex parts with curved surfaces. Mechanistically, this type of 5-DoF fully PMR can achieve no singularity in the workspace after optimum design, allowing the mobile platform to be adjusted to an arbitrary orientation directly and flexibly. To full leverage these mechanical characteristics, the concept of planning orientation paths in a unit spherical coordinate system was proposed in our previous work, thereby enhancing orientation adjustment efficiency. However, challenges in toolpath continuity and computational simplicity still persist. In light of this concern, constraint equations were formulated to ensure continuity between two adjacent B-splines, and a configuration of control points was established to maintain controllable curvature. Building on this, a symmetrical arrangement strategy was introduced to set shape limits for fitted B-splines to achieve high-order continuity, and a corresponding toolpath planning method was developed. To decrease computational complexity during feedrate scheduling, a system of linear constraints was utilized to calculate the feedrate for each point, with the feedrate calculation and interpolation occurring concurrently to generate the motion trajectory in real time. Trajectory planning for S-shaped toolpaths was conducted using the proposed method and the commercial ISG CNC kernel, with comparison results demonstrating that our method significantly improves motion efficiency, reduces computational complexity, and mitigates feedrate and acceleration fluctuations. This study offers a more efficient and effective trajectory planning approach, significantly contributing to the advancement of 5-DoF PMR technology.

Developing continuous machining strategy for cost-effective five-axis CNC milling systems with a four-axis controller

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Continuous Toolpath Optimization for Simultaneous Four‐Axis Subtractive Manufacturing

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

Tool path generation and simulation of dynamic cutting process for five-axis NC machining

Five-axis STEP-NC Controller for Machining of Surfaces

A Real-Time C3 Continuous Tool Path Smoothing and Interpolation Algorithm for Five-Axis Machine Tools

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

An Intelligent Controller Based on Constant Cutting Force for 5-Axis Milling

An accurate surface error optimization for five-axis machining of freeform surfaces

Five-axis Contour Error Control Considering Milling Force Effects for CNC Machine Tools

Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

The Five-Axis NC Machining Simulation and Optimization

A Symmetrical Arrangement Strategy Based Real-Time Toolpath Planning Method for a 5-Dof Fully Parallel Machining Robot

Study on Cutter Radius Compensation Methods for 5-Axis Cnc Machining

Five-axis path smoothing based on sliding convolution windows for CNC machining

Crossing Principle-Based Feedrate Planning Method for 5-Axis CNC Milling with Drive Constraints

Design And Research on Machining Orientation Control Based on Five Axis CNC Machine Tools

A Novel Local Smoothing Method for Five-Axis Machining With Time-Synchronization Feedrate Scheduling

Transformation and related problem solution of milling machine with five axis interpolating