Abstract:The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature on the macroscopic and microscopic properties of rocks, this paper has taken sandstone as the research object and conducted uniaxial compression tests on sandstone specimens at different temperatures (20–1000 °C) and different heating rates (5–30 °C/min). At the same time, the acoustic emission (AE) test system was used to observe the acoustic emission characteristics of the rock damage process, and the microstructural changes after high temperature were analyzed with the help of a scanning electron microscope (SEM). The test results show that the effect of temperature on sandstone is mainly divided into three stages: Stage I (20–500 °C) is the strengthening zone, the evaporation of water and the contraction of primary fissures, and sandstone densification is enhanced. In particular, the compressive strength and elastic modulus increase, the macroscopic damage mode is dominated by shear damage, and the fracture micromorphology is mainly brittle fracture. Stage II (500–600 °C) is the transition zone, 500 °C is the threshold temperature for the compressive strength and modulus of elasticity, and the damage mode changes from shear to cleavage damage, and the sandstone undergoes brittle–ductile transition in this temperature interval. Stage III is the physicochemical deterioration stage. The changes in the physical and chemical properties make the sandstone compressive strength and modulus of elasticity continue to decline, the macroscopic damage mode is mainly dominated by cleavage damage, and the fracture microscopic morphology is of a more toughness fracture. The effect of different heating rates on the mechanical properties of sandstone was further studied, and it was found that the mechanical properties of the rock further deteriorated under higher heating rates.

Damage Analysis of Sandstone During the Creep Stage After High-Temperature Heat Treatment Based on NMR Technology

Creep mechanical properties and creep damage model of sandstone considering temperature effect based on acoustic emission

Creep damage properties and nonlinear creep model of red sandstone treated at high temperature based on acoustic emission

The Nonlinear Creep Behaviors of Sandstone Under the Different Confining Pressures Based on NMR Technology

Creep mechanical characteristics and nonlinear viscoelastic‐plastic creep model of sandstone after high temperature heat treatment

Detecting freeze–thaw damage degradation of sandstone with initial damage using NMR technology

Experimental study on changes of pore structure and mechanical properties of sandstone after high-temperature treatment using nuclear magnetic resonance

Effects of high-temperature thermal treatment on the porosity of red sandstone: an NMR analysis

Analysis of the Microscopic Evolution of Rock Damage Based on Real-Time Nuclear Magnetic Resonance

Experimental Investigation On The Effects Of Ambient Freeze-Thaw Cycling On Creep Mechanical Properties Of Sandstone Under Step Loading

NMR Pore Structure and Dynamic Characteristics of Sandstone Caused by Ambient Freeze-Thaw Action

Micro-mechanism of brittle creep in saturated sandstone and its mechanical behavior after creep damage

A Stratified NMR-Based Investigation of Spatial Evolution of Pore Structure in Sandstone After Cyclic Heating and Local Water Cooling

Long-term creep and microscopic deformation mechanisms of sandstone using rock rheology creep equipment and scanning through high-resolution 3D XRM

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Experimental investigation on the damage and deterioration of sandstone subjected to cycling pore water pressure

Nuclear magnetic resonance analysis of the failure and damage model of rock masses during freeze‒thaw cycles

Nonlinear creep properties and time-to-failure prediction of sandstone under saturated and dry conditions

The impact of high temperature on mechanical properties and behaviors of sandstone

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample