Abstract:The existing research on continuous structure is usually analyzed with finite element method (FEM) and granular medium with discrete element method (DEM), but there are few researches on the coupling interaction between continuous structure and discrete medium. To the issue of this coupling interaction, a multi-scale simulation method with coupled finite/discrete element model is put forward, in their respective domains of discrete and finite elements, the nodes follow force law and motion law of their own method, and on the their interaction interface, the touch type between discrete and finite elements is distinguished as two types: full touch and partial touch, the interaction force between them is calculated with linear elastic model. For full touch, the contact force is proportional to the overlap distance between discrete element and finite element patch. For partial touch, first the finite element patch is extended on all sides indefinitely to be a complete plane, the full contact force can be obtained with the touch type between discrete element and plane being viewed as full touch, then the full overlap area between them and the actual overlap area between discrete element and finite element patch are computed, the actual contact force is obtained by scaling the full contact force with a factor η which is determined by the ratio of the actual overlap area to the full overlap area. The contact force is equivalent to the finite element nodes and the force and displacement on the nodes can be computed, so the ideal simulation results can be got. This method has been used to simulate the cutter disk of the earth pressure balance shield machine (EPBSM) made in North Heavy Industry (NHI) with its excavation diameter of 6.28 m cutting and digging the sandy clay layer. The simulation results show that as the gradual increase of excavating depth of the cutter head, the maximum stress occurs at the roots of cutters on the cutter head, while for the soil, the largest stress is distributed at the region which directly contacted with the cutters. The proposed research can provide good solutions for correct design and installation of cutters, and it is necessary to design mounting bracket to fix cutters on cutter head.

Contact model and elastic deformation analysis of plate structure based on the discrete element method

A Coupled SPFEM/DEM Approach for Multiscale Modeling of Large‐deformation Geomechanical Problems

New Discrete Element Models for Elastoplastic Problems

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies

A Godunov ‐type discrete element model for elastic‐viscoplastic continuum impact problems

Dynamics and Active Control of Largely Deflected Active Structures Using the Finite Element Technique

Investigation of the Elastoplastic and Fracture Behavior of Solid Materials Considering Microstructural Anisotropy: A Discrete Element Modeling Study

Multi-scale simulation method with coupled finite/discrete element model and its application

Application of Discrete Element Method for Continuum Dynamic Problems

DISCRETE ELEMENT METHOD FOR PLANE ELASTIC PROBLEM

Finite Difference Based Electrical Modeling and Vibration Control Simulation of Piezoelectric Structronic Plate System

Numerical Simulation for High-Speed Impact Problems by Discrete Element Method

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

A Unified Full-Field Deformation Measurement Approach for Plates With Different Thickness

Discrete element-embedded finite element model for simulation of soft particle motion and deformation

Discrete Element Modeling of Three-Dimensional Impact Problems Including Elastoplastic Deformations and Severe Damages

A displacement-based element model for solving the edge effect problem of Mindlin-Reissner plate

A finite element method for investigating general elastic multi-structures

A New Composite Plate/plate Element for Stiffened Plate Structures Via Absolute Nodal Coordinate Formulation

3D Mode Discrete Element Method with the Elastoplastic Model

A deformable spheropolygon-based discrete element method