Abstract:Silicon is considered one of the most promising negative electrode materials for future lithium ion batteries (LIBs) due to its high capacity (3579 mAh g-1 , based on Li15Si4) and its proper delithiation voltage (~ca. 0.4 V vs. Li/Li+). However, the huge volume change (~300 %) of Si during lithiation/delithiation leads to fracture and pulverization and of Si particles, continuous formation of solid-electrolyte interphase (SEI), and, consequently, fast capacity fade. Mechanical degradation remains a major barrier for commercializing Si electrodes. The most likely commercial Si electrodes, i.e., Si composite electrodes consisting of Si particles, conductive additives, polymeric binders, and porosity, are likely to exhibit mechanical properties and volume expansion/shrinkage behavior that are different from that of individual Si particles and Si thin films. Despite of a growing effort on electro-mechanical modeling of Si electrodes, the mechanical behavior and microstructure evolution of Si composite electrodes during lithiation/delithiation are largely unknown. To fill this gap, we developed an environmental nanoindentation system installed inside an argon-filled glovebox [Adv. Energy Mater., 10.1002/aenm.201702578 (2017) and Scr. Mater. 130, 191 (2017)] to measure Young’s modulus (E) and hardness (H) of Si composite electrodes during lithiation/delithiation under both dry and wet (the liquid electrolyte) conditions. In contrast to Si films, E and H values of Si/polyvinylidene fluoride (PVDF) electrodes and Si/Na-carboxymethyl cellulose (Na-CMC) electrodes, under both dry and wet conditions, increase with increasing Li concentration within each electrochemical cycle and decrease with increasing cycle number. The E and H values of the composite electrodes under dry condition are smaller than that under wet condition due to the softening of polymeric binders in the electrolyte. The porosity of both composite electrodes decreases with increasing Li concentration and increases with increasing cycle number. At the same state-of-charge (SOC), Si/Na-CMC electrodes have smaller porosity and better mechanical integrity than Si/PVDF electrodes, which is one of the reasons why Na-CMC works better than PVDF as a binder. The results show that mechanical integrity and microstructural stability play a vital role in improving the performance and durability of Si composite electrodes. The relationships between E, H, porosity, and SOC is useful to develop and validate electro-mechanical models of electrodes. They also provide valuable insight into developing high capacity Si electrodes. Furthermore, the environmental nanoindentation method can be used to measure the mechanical behavior of a wide range of electrochemical energy storage materials under realistic working conditions.

In Situ Thickness Measurements During Cycling of Li-Ion Pouch Cells with Silicon Negative Electrodes

Insights into the Swelling Force in Commercial LiFePO4 Prismatic Cell

Magnetic Force Dilatometry of Silicon-NMC622 Lithium-Ion Coin Cells: The Effects of Binder, Capacity Ratio, and Electrolyte Selection

In-situ obtained internal strain and pressure of the cylindrical Li-ion battery cell with silicon-graphite negative electrodes

Laser Scanning Method for High-Resolution Thickness Mapping of Lithium-Ion Pouch Cells

Investigating the effects of silicon and carbon components on the thickness evolution and performance degradation of silicon–carbon electrodes through electrochemical dilatometry

Mechanical behavior of Silicon-Graphite pouch cells under external compressive load: Implications and opportunities for battery pack design

In-situ Observation of Inhomogeneous Degradation in Large Format Li-ion Cells by Neutron Diffraction

Identifying the origin of inhomogeneous degradation and irreversible swelling inside cylindrical 21700 high-energy lithium-ion cells

Reversible and Irreversible Expansion of Lithium-ion Batteries Under a Wide Range of Stress Factors

Methods for Quantifying Expansion in Lithium-Ion Battery Cells Resulting from Cycling: A Review

Effect of Mechanical Pressure on Lifetime, Expansion, and Porosity of Silicon-Dominant Anodes in Laboratory Lithium-Ion Cells

How do Depth of Discharge, C-rate and Calendar Age Affect Capacity Retention, Impedance Growth, the Electrodes, and the Electrolyte in Li-Ion Cells?

Investigation of The Failure Mechanisms of Li-Ion Pouch Cells with Si/Graphite Composite Negative Electrodes and Single Wall Carbon Nanotube Conducting Additive

Quantifying capacity loss due to solid-electrolyte-interphase layer formation on silicon negative electrodes in lithium-ion batteries

Stress Evolution in Lithium-ion Composite Electrodes during Electrochemical Cycling and Resulting Internal Pressures on the Cell Casing

Transient Self-Discharge after Formation in Lithium-Ion Cells: Impact of State-of-Charge and Anode Overhang

In Situ Measurement of Mechanical Property and Stress Evolution in a Composite Silicon Electrode

External Short-Circuit Scenarios under Different Mechanical Pressures Applied to Lithium-Ion Cells with Silicon-Dominant Anodes

Non-destructive Local Degradation Detection in Large Format Lithium-Ion Battery Cells Using Reversible Strain Heterogeneity

Strain-Induced Lithium Losses in the Solid Electrolyte Interphase on Silicon Electrodes