Abstract:Fluorinated electrolytes based on fluoroethylene carbonate (FEC) have been considered as promising alternative electrolytes for high-voltage and high-energy capacity lithium-ion batteries (LIBs). However, the compatibility of the fluorinated electrolytes with graphite negative electrodes is unclear. In this paper, we have systematically investigated, for the first time, the stability of fluorinated electrolytes with graphite negative electrodes, and the result shows that unlike the ethylene carbonate (EC)-based electrolyte, the FEC-based electrolyte (EC was totally replaced by FEC) is incapable of forming a protective and effective solid electrolyte interphase (SEI) that protects the electrolyte from runaway reduction on the graphite surface. The reason is that the lowest unoccupied molecular orbital energy levels are also lowered by the introduction of fluorine into the solvent, and the FEC solvent has poorer resistance against reduction, leading to instability on the graphite negative electrode. To tackle this problem, two lithium salts of lithium bis(oxalato)borate and lithium difluoro(oxalato)borate (LiDFOB) have been investigated as negative-electrode film-forming additives. Incorporation of only 0.5 wt % LiDFOB to a FEC-based electrolyte [1.0 M LiPF6 in 3:7 (FEC−ethyl methyl carbonate)] results in excellent cycling performance of the graphite negative electrode. This improved property originates from the generation of a thinner and better quality SEI film with little LiF by the sacrificial reduction of the LiDFOB additive on the graphite negative electrode surface. On the other hand, this additive can stabilize the electrolyte by scavenging HF. Meanwhile, the incorporated LiDFOB additive has positive influence on the interphase layer on the positive electrode surface and significantly decreases the amount of HF formation, finally leading to improved cycling stability and rate capability of LiNi0.5Mn1.5O4 electrodes at a high cutoff voltage of 5 V. The data demonstrate that the LiDFOB additive not only exhibits a superior compatibility with graphite but also improves the electrochemical properties of high-voltage spinel LiNi0.5Mn1.5O4 positive electrodes considerably, confirming its potential as a prospective, multifunctional additive for 5 V fluorinated electrolytes in high-energy capacity lithium-ion batteries (LIBs).

Organofluorophosphates as Oxidative Degradation Products in High-Voltage Lithium Ion Batteries with NMC or LNMO Cathodes

Formation and Suppression of Toxic Organofluorophosphates in Lithium Ion Batteries: Making the High-Voltage Additive Lithium Difluorophosphate Viable for Commercial Applications

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

High‐Voltage Instability of Vinylene Carbonate (VC): Impact of Formed Poly‐VC on Interphases and Toxicity

Lithium Difluorophosphate: A Boon for High Voltage Li Ion Batteries and a Bane for High Thermal Stability/Low Toxicity: Towards Synergistic Dual Additives to Circumvent this Dilemma

Fluorinated Cyclic Phosphorus(III)-Based Electrolyte Additives for High Voltage Application in Lithium-Ion Batteries: Impact of Structure-Reactivity Relationships on CEI Formation and Cell Performance.

Exploring High-Voltage Fluorinated Carbonate Electrolytes for LiNi0.5Mn1.5O4 Cathode in Li-ion Batteries

Elementary Decomposition Mechanisms of Lithium Hexafluorophosphate in Battery Electrolytes and Interphases

Fluorinated Electrolytes for Li-Ion Batteries: The Lithium Difluoro(oxalato)borate Additive for Stabilizing the Solid Electrolyte Interphase

Attenuating Reductive Decomposition of Fluorinated Electrolytes for High-Voltage Lithium Metal Batteries

Xia, Lan and Lee, Saixi and Jiang, Yabei and Xia, Yonggao and Chen, George Z. and Liu, Zhaoping (2017) Fluorinated electrolytes for li-ion batteries: the lithium difluoro(oxalato)borate additive for stabilizing the solid

High-Safety and High-Efficiency Electrolyte Design for 4.6 V-class Lithium-Ion Batteries with Non-Solvating Flame-Retardant

Fluorinated Carbon Nitride with a Hierarchical Porous Structure Ameliorating PEO for High-Voltage, High-Rate Solid Lithium Metal Batteries

Elucidating the Limit of Lithium Difluorophosphate Electrolyte Additive for High‐Voltage Li/Mn‐Rich Layered Oxide || Graphite Li Ion Batteries

Degradation pathways in lithium-ion batteries with ethylene carbonate-free electrolytes

Transformed Solvation Structure of Noncoordinating Flame‐Retardant Assisted Propylene Carbonate Enabling High Voltage Li‐Ion Batteries with High Safety and Long Cyclability

Nonflammable Electrolytes for Lithium Ion Batteries Enabled by Ultraconformal Passivation Interphases

Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes to Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries

High-safety and High-Efficiency Electrolyte Design for 4.6 V-class Lithium-Ion Batteries with a Non-Solvating Flame-Retardant

Enhancing the Performance and Stability of Li-Ion Batteries with Fluorinated Electrolytes: Insights from MD Simulation and Experimental Analysis

Unveiling Decaying Mechanism of Non-Flammable All-Fluorinated Carbonate Electrolytes in Lithium Metal Batteries with 4.6-V Licoo2 Cathodes at Elevated Temperatures