Abstract:Currently, research on oily sludge treatment mainly focuses on optimizing the deoiling effect and research on the deoiling mechanism, and the influence of petroleum components on the properties and treatment of oily sludge is rarely considered. Therefore, in this study, petroleum substances in three types of oil sludge were eluted using the biosurfactant cleaning technology, and the influence of petroleum components on the cleaning process was explored. The results showed that the biosurfactants rhamnolipid and sophorolipid had a synergistic effect, and the oil-removal rate was as high as 92.2% when the SL mass fraction was 0.4 in the compound biosurfactant. Three types of oily sludge, wellsite-landing sludge, pipeline-landing sludge, and tank-bottom sludge, were cleaned by the compound biosurfactant; the results showed that the residual petroleum substance in liquid and solid phases, the turbidity value, and the zeta-potential value of the supernatant of oil sludge samples after cleaning increased with the increase in the heavy components of the oily sludge, and the oil-removal rate decreased gradually. After cleaning, the average relative molecular weight of the three oil phases increased with the heavy components, which was increased by 1.83, 4.83, and 10.72%, respectively, and the increase in molecular weight increased the difficulty of cleaning. After cleaning, the retention time and peak intensity of the oil sample changed significantly, and it had a stronger elution effect on low-molecular-weight alkanes. It was found that the compound biosurfactant had a good elution effect on polycyclic aromatic hydrocarbons, but the increase in the content of heavy components and the increase in aromatic rings increased the difficulty of cleaning. Moreover, it was found that the compound biosurfactant could not completely elute the petroleum substances on the surface of solid particles, and the asphaltene components in the oil phase were more difficult to elute than other components.This article has not yet been cited by other publications.

Treating Oil Sludge by Microemulsion System Containing Sodium Dodecyl Sulfonate

Oil Sludge Treatment by a Microemulsion System Containing Sodium Dodecyl Benzene Sulfonate

Removal of emulsified water in petroleum sludge using micro-emulsion method

Oil Recovery from Polymer-Containing Oil Sludge in Oilfield by Thermochemical Cleaning Treatment

Probe into a novel surfactant-free microemulsion system of ethylene glycol monobutyl ether + water + diesel for crude oil removal and recovery from oily sludge

Oil recovery from oil sludge through combined ultrasound and thermochemical cleaning treatment

Study on the synergism mechanism of composite surfactants for oily sludge treatment using microemulsion method

Comprehensive Treatment and Utilization Technology of Oil-Extraction & Solidization of High-Oil-Content Sludge in the Oil Field

Dewatering of Floated Oily Sludge by Treatment with Rhamnolipid.

Research on the influencing factors and mechanism of single-phase microemulsion cleaning of shale gas oil-based cuttings

Micro-emulsion method for reducing viscosity of petroleum sludge

Crude Oil-Contaminated Soil Treatment and Oil Recovery through Micro-Emulsion Washing

Study on the Effect of Petroleum Components on the Elution of Oily Sludge by a Compound Biosurfactant

Optimization and mechanism of oily sludge treatment by a novel combined surfactants with activated-persulfate method

Sustainable treatment and recycling of oily sludge: Incorporation into gel -system to improve oil recovery.

Study on modified graphene oxide-based emulsion cleaner for oily sludge

Preparation of ionic liquids microemulsion and its application for the treatment of oily sludge

Study on Process Parameters of Oily Sludge Washing

Study on the Petroleum Ether-Extraction Technique of Oil Sludge

Advances in ultrasonic treatment of oily sludge: mechanisms, industrial applications, and integration with combined treatment technologies

LUBRICATING OIL SLUDGE AND ITS DEMULSIFICATION