Abstract:The emulsification of heavy oil and water into a W/O emulsion would increase the viscosity of the W/O emulsion and reduce the mobility of heavy oil. As we know, addition of a viscosity reducer such as water-soluble surfactants could change the status of emulsion and improve the mobility of heavy oil. Although up to 90% viscosity reduction could be achieved in laboratory experiments, field improvement of the heavy oil recovery is not satisfactory with addition of a viscosity reducer. Actually, it is related to the difference of the mixing process of water-soluble viscosity reducer, water, and heavy oil between lab experiments and subsurface flow in the formation. The viscosity of heavy oil is significantly affected by the temperature and emulsification. As for the heavy oil sampled from Bohai Oilfield, its viscosity decreases by 95% when the temperature increases from 50 to 100 °C. At 50 °C, the viscosity of the W/O emulsion with 70% water content is up to 21.05 times that of the dehydrated heavy oil. In the emulsification process of the W/O emulsion, water molecules disperse into heavy oil and agglomerate together to form water droplets, and the number of water droplets increases when the water content is increased. When we add some amount of a water-soluble viscosity reducer to the W/O emulsion, the re-emulsification process or the way of addition of the water-soluble viscosity reducer has a great effect on the variation of the state and viscosity. When heavy oil is mixed with 30% content of water-soluble viscosity reducer solution (the reducer content is 1% of the emulsion), up to 98% reduction in the viscosity of heavy oil could be obtained. However, when the W/O emulsion with 30% water content is mixed with 1% water-soluble viscosity reducer, only 4% reduction in the viscosity of emulsion is observed. In the re-emulsification process of water in a W/O emulsion with addition of a reducer, pieces of heavy oil containing a number of water droplets are separated by the reducer solution and a W/O/W emulsion is generated. The pieces of heavy oil containing water droplets in such a W/O/W emulsion are much larger than the heavy oil droplets in an O/W emulsion. As the heavy oil in the reservoir is in the state of a W/O emulsion, a W/O/W emulsion with large heavy oil pieces containing water droplets will be generated when a water-soluble viscosity reducer solution is injected, and the resulted viscosity reduction is much lower than expected based on conventional lab experiments. Consequently, the experiments related to heavy oil with addition of a water-soluble viscosity reducer should be carried out with the W/O emulsion.

Micro-emulsion method for reducing viscosity of petroleum sludge

Removal of emulsified water in petroleum sludge using micro-emulsion method

Viscosity Reduction Process of Heavy Oil by Catalytic Co-Pyrolysis with Sawdust

Viscosity Properties and Viscosity Reduction of Oil Sludge from Tank Bottom

Study on the synergism mechanism of composite surfactants for oily sludge treatment using microemulsion method

Synergistic Collaboration between a Viscosity Reducer and a Surfactant for in Situ Emulsion Formation to Enhance Heavy-Oil Recovery

Effect of the Particle Surface on Oil Recovery from Petroleum Sludge

Application of rhamnolipid as a novel biodemulsifier for destabilizing waste crude oil.

The Role of Amphiphilic Nanosilica Fluid in Reducing Viscosity in Heavy Oil

The Influencing Factors and Mechanism of Anionic and Zwitterionic Surfactant on Viscosity Reduction in Heavy O/W Emulsions

Synthesis and Molecular Dynamics Simulation of Amphiphilic Low Molecular Weight Polymer Viscosity Reducer for Heavy Oil Cold Recovery

Quadripolymers As Viscosity Reducers for Heavy Oil

Viscosity Reduction of Heavy Oils of Different Viscosities Based on General Cationic/Anionic Surfactant Systems

Dewatering of Floated Oily Sludge by Treatment with Rhamnolipid.

Optimization of an oil recovery process from oily sludge using a combined technique of froth flotation and centrifugal treatment

A molecular study of viscosity-causing mechanism and viscosity reduction through re-emulsification for Jimsar shale oil

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

Optimization of injection parameters of a microemulsion-type oil displacement agent for heavy oil recovery

Emulsification and interfacial characteristics of different surfactants enhances heavy oil recovery: experimental evaluation and molecular dynamics simulation study

Study on the Effect of Petroleum Components on the Elution of Oily Sludge by a Compound Biosurfactant

Study on the Re-emulsification Process of Water in Heavy Oil Emulsion with Addition of Water-Soluble Viscosity Reducer Solution