Abstract:With the rapid development of high-speed railway (HSR) in China, the problem of environmental vibration induced by HSR train has attracted critical concern. In this paper, a combination vibration reduction (CVR) strategy of hollow-closed-wall in-filled trench (HIT) and elastic bearing (EB) is proposed to decrease environmental vibration induced by HSR train, in which the depth of HIT could be well controlled to benefit the practical construction and economic cost. Based on the multi-body dynamics and finite element theory, HSR environmental vibration system is established and then divided into two sub-models including the 'train-track-bridge' vibration source sub-model and the 'pile-soil' vibration propagation sub-model. The two sub-models are connected via the force balance condition of the pier bottom. The verification of numerical models is conducted by comparing with the empirical formula and the ground data in the references. Then the attenuation law of environmental vibration is analyzed, and the vertical component is shown to be dominant in the HSR environmental vibration. On this basis, numerical simulations are performed to analyze the environmental vibration reduction under three strategies, namely the HIT, EB, and CVR. The results show that the HIT presents a distinct vibration reduction effect in the frequency range above 4 Hz and the vibration reduction becomes more obvious as the HIT's depth increases. However, the depth should be larger than 8 m to satisfy the code requirement; the EB presents an obvious reduction in the frequency range above 8 Hz; the CVR strategy not only further decrease the environmental vibration, but also effectively reduce the HIT's depth. By numerical analysis, the combination strategy of 6 m deep HIT and 2200 kN/mm vertical stiffness EB is recommended in the HSR environmental vibration reduction, which could also satisfy the limit of Chinese railway code.

Energy-Harvesting Adaptive Vibration Damping in High-Speed Train Suspension using Electromagnetic Dampers

A Piezoelectric Acoustic Black Hole Absorber for Rail Vibration Reduction and Energy Harvesting: Semi-analytical Model

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Enhancing the performance of electromagnetic damper cum energy harvester using microcontroller: Concept and experiment validation

High-performance semiactive secondary suspension of high-speed trains using negative stiffness and magnetorheological dampers

An energy harvesting shock absorber for powering on-board electrical equipment in freight trains

Modelling and Analysis of Power-Regenerating Potential for High-Speed Train Suspensions

Integration of Triboelectric Sensing and Electromagnetic Energy Harvesting for Self-adaptive Vibration Suppression

A hybrid damping control strategy for high-speed trains running on existing tracks

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig

Vibration Suppression of HTS Maglev System Based on Negative Resistance Electromagnetic Shunt Damper

A Study on the Analytic Power Estimation of the Electromagnetic Resonant Energy Harvester for the High-Speed Train

Electro-hydraulic Damper for Energy Harvesting Suspension: Modeling, Prototyping and Experimental Validation

Study on an Energy-Harvesting Magnetorheological Damper System in Parallel Configuration for Lightweight Battery-Operated Automobiles

A self-powered and self-sensing hybrid energy harvester for freight trains

Studies on a Passive Electromagnetic Damper

A Combination Strategy of Hollow-Closed-wall In-Filled Trench and Elastic Bearing for Reducing Environmental Vibration Induced by High-Speed Train

Self-Sensing Approach for Semi-Active Control of Variable Damping Electromagnetic Suspension System

Prescribed Performance Control-Based Semi-Active Vibration Controller for Seat Suspension Equipped with an Electromagnetic Damper

Assessment of Ride Comfort and Braking Performance Using Energy-Harvesting Shock Absorber

Numerical and experimental study on adaptive stiffness yaw damper for suppressing abnormal vibration of high-speed trains