Abstract:Journal of Vibration and Control, Ahead of Print. High-temperature superconducting (HTS) pinning maglev systems have emerged as promising solutions for high-speed transit, offering self-stability, simplicity, and reliability. These systems utilize the pinning effect between superconducting bulks beneath the vehicle and a permanent magnet guideway (PMG) to achieve levitation and guidance, with propulsion provided by a linear motor. However, the train is subjected to random excitations due to geometric and magnetic field irregularities of the PMG. While much of the existing research has concentrated on mitigating car body vibration for enhanced ride comfort, the issues related to frame vibration and the maintenance of consistent linear motor air gaps are still not fully addressed. This study introduces a secondary semi-active suspension device aimed at attenuating frame vibration in the HTS pinning maglev system. The research initially establishes a vehicle model based on an existing HTS pinning maglev test line and obtains track irregularity time-domain samples using the power spectral density (PSD) function. Classic semi-active control algorithms and the electromagnetic shunt damper (EMSD), enabling the implementation of semi-active control strategies, are then introduced. Subsequently, employing the groundhook linear (GH linear) control strategy, a vibration suppression model for the frame is established using the UM/Simulink co-simulation method. Finally, a comparison is made between the passive suspension system and the semi-active suspension system, with the Sperling index calculated to evaluate performance. The results affirm that this secondary semi-active suspension device not only significantly reduces frame vibration but also complies with ride comfort requirements, offering practical insights for future engineering applications.

Vibration Suppression of HTS Maglev System Based on Negative Resistance Electromagnetic Shunt Damper

Design and Analysis of Parallel Hybrid-Excited Superconducting Linear Motor for High-Speed Electromagnetic Suspension Maglev

Multi-objective Optimization for the Levitation System of the Electrodynamic Suspension Train with HTS Magnets

Researching Magnetic Suspension for 1000mw Hydraulic Generator Set

Secondary semi-active suspension for high-temperature superconducting pinning maglev system based on electromagnetic shunt damper

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Electromagnetic Analysis of Hybrid-Excitation Magnetic Levitation System for Low-speed Maglev Train

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Manufacture and Preliminary Prototype Test of a HTS Suspension Electromagnet for Maglevs

Levitation performance evolution of high-temperature superconducting maglev vehicle under electromagnetism-heat-force strong coupling

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

Study on the Frequency Variation and Amplitude Variation Characteristics of HTS Bulks

The Study on Propulsion Force Character of an Integrated Operation System for HTS Maglev Train

Design, Construction and Performance of an EMS-based HTS Maglev Vehicle

High-performance semiactive secondary suspension of high-speed trains using negative stiffness and magnetorheological dampers

Vibration Modal Analysis of Superconducting Levitation With LCR Shunt Damper

Vibration Suppression for Magnetically Levitated High-Speed Motors Based on Polarity Switching Tracking Filter and Disturbance Observer

Dynamic Performance Analysis Model of High-Reliability Ems-Maglev System

Structural Dynamics Modeling of an On-Board HTS Magnet Prototype Cooled by Solid Nitrogen for High-Speed Maglev Trains

Dynamic Response Simulation of the HTS Bulk Over an Actual Permanent Magnet Guideway Using Different E-J Relationships

An Experimental Study on the Controllability of HTS Coils in MAGLEV Systems