Abstract:Nano composites have been utilized increasingly because of their high strength, stiffness, toughness, and through-thickness properties. The incorporation of carbon nano fibers with a high aspect ratio and extremely large surface area into glass/epoxy polymer composites improve their tensile and compression properties significantly. Although a number of efforts have been made to improve various properties by mixing nano particles directly into resin, however, it could lead to high viscosities which create problems during processing. In this particular study, an attempt has been made to investigate tensile and compression behavior of nano composites by using, state of the art, a different technique i.e spraying the Carbon Nano Fibers (CNF) on dry woven glass pre-form before infusion. The nano composite samples were prepared using a spraying methodology i.e dispersing the 2.0 weight percent CNF solution on glass fabric, and evaporating the solvent such that only nano fibers remain on perform, followed by Vacuum Assisted Resin Transfer Molding (VARTM). Tensile and compression tests were performed to evaluate the effectiveness and behavior of CNF addition on these mechanical properties. Results indicated simultaneous improvement in tensile and compression properties by incorporating a very small amount of carbon nano fibers into the matrix system. 18-21 percent improvement in tensile strength and 6-9 percent in compressive strength, with respect to the neat composite. The rise in their modulus has also been discussed in detail and part of this study. For in-depth analysis, microscopic approaches were also carried out to investigate the fracture behavior and mechanism of material. Scanning electron microscopy of fractured surfaces revealed improved primary fiber matrix adhesion and indications of CNF-induced matrix toughening due to the presence of CNFs. SEM evaluation also revealed relatively less damage in the tested fracture surfaces of the nano phased composites in terms of matrix failure, fiber breakage, matrix fiber de-bonding, and de-lamination, compared to the neat system.

Cold nitrogen plasma treated glass fiber warp knitted structural composites: mechanical properties and response surface analysis

Evaluation of Interfacial Properties of Atmospheric Pressure Plasma-Treated Cnt-Phenolic Composites by Dual Matrix Fragmentation and Acoustic Emission Tests

Damage evolution behavior of cold plasma treated glass fiber/vinyl ester resin composites under bending load by acoustic emission

Impact of plasma-modified pretreatment on the tensile properties of carbon fiber-reinforced epoxy composites

Effect of the Atmospheric Plasma Treatment Parameters on the Surface and Mechanical Properties of Carbon Fabric

Effects of argon plasma treatment on carbon fiber surface characteric and its reinforcing polyimide composites interfacial properties at room and elevated temperatures

Comparative studies of nitrogen plasma and argon plasma treatment on the strength of PBO fibre reinforced high-temperature resistant thermoplastic composite

Effect of cold plasma treatment on the interfacial properties of carbon fiber braid/epoxy composites

Tensile and compression behavior of woven glass/epoxy nano composites based on spraying methodology

Effects of Fibre Surface Treatment on Dynamic Tensile Properties of Glass Woven Fabric Reinforced Vinylester Composites

Mechanical Characterization of Glass/epoxy Polymer Composites Sprayed with Vapor Grown Carbon Nano Fibers

Effect Of Air Plasma Treatment On Interfacial Shear Strength Of Carbon Fiber-Reinforced Polyphenylene Sulfide

Mechanical properties of flexible composites reinforced with high-performance glass fiber multi-axial warp-knitted fabrics

Interface failure identification of argon/nitrogen double plasma modified hybrid laminated para‐aramid composites

Effect of air plasma treatment on the mechanical properties of polyphenylene sulfide/glass fiber cloth composites

The uniform treatment of carbon fiber surface in three-directional orthogonal fabric by oxygen-plasma

Interlaminar microstructure and mechanical response of 3D robust glass fabric-polyester composites modified with carbon nanofibers

Mechanical and Thermal Properties of Glass Reinforced Composites

Augmented interlaminar fracture toughness of nanofibers-interleaved composite laminates via plasma treatment

Plasma treatment and annealing conditions on mechanical and electrical properties of thermoplastic composites

Plasma Activation of Carbon Fibres for Polyarylacetylene Composites