Abstract:The objective of this study was to evaluate ADMI color removal from a biologically treated textile mill effluent by heterogeneous photocatalysis with UV-visible irradiation (UV-vis) using a novel catalyst composed of TiO2 supported on hydrotalcite and doped with iron oxide (HT/Fe/TiO2). Simulated biological treatment of solutions of the dyes (50 mg/L) used in the greatest amounts at the mill where the textile effluent was collected resulted in no color removal in reactive dye solutions and about 50% color removal in vat dye solutions, after 96 h, indicating that the secondary effluent still contained a large proportion of anionic reactive dyes. Photocatalytic treatments were carried out with TiO2 and HT/Fe/TiO2 of Fe:Ti molar ratios of 0.25, 0.5, 0.75 and 1, with varying catalyst doses (0-3 mg/L), initial pH values (4-10) and UV-vis times (0-6 h). The highest ADMI color removal with unmodified TiO2 was found at a dose of 2 g/L and pH 4, an impractical pH value for industrial application. The most efficient composite was HT/Fe/TiO2 1 at pH 10, also at a dose of 2 g/L, which provided more complete ADMI color removal, from 303 to 9 ADMI color units (96%), than unmodified TiO2, from 303 to 37 ADMI color units (88%), under the same conditions. Hydroxyl radicals were responsible for the color reduction, since when 2-propanol, an OH scavenger, was added color removal was very low. For this reason, the HT/Fe/TiO2 1 composite performed better at pH 10, because the higher concentration of hydroxide ions present at higher pH favored hydroxyl radical formation. COD reductions were relatively low and similar, approximately 20% for both catalysts after 6 h under UV-vis, because of the low initial COD (78 mg/L). Secondary effluent toxicity to Daphnia similis (EC50 = 70.7%) was reduced by photocatalysis with TiO2 (EC50 = 95.0%) and the HT/Fe/TiO2 1 composite (EC50 = 78.6%). HT/Fe/TiO2 1 was reused five times and still lowered secondary effluent ADMI color below local discharge limits. Benefits of the HT/Fe/TiO2 1 catalyst compared to TiO2 include its lower bandgap energy (2.34 eV vs 3.25 eV), higher ADMI color removal and its magnetic nature that facilitated its recovery and would reduce treatment costs.

Removal of Methyl Violet Dye by Adsorption Process on Hydrogen Titanate Nanotubes: Experimental-Theoretical Study

Boosting the Adsorption and Removal of Dye from Water by COOH-functionalized Carbon Nanotubes

Removal of Methyl Violet from Aqueous Solution by Adsorption onto Halloysite Nanoclay: Experiment and Theory

Removal of methyl violet 2B dye from aqueous solution using a magnetic composite as an adsorbent

Adsorption of malachite green and methyl violet 2B by halloysite nanotube: Batch adsorption experiments and Box-Behnken experimental design

Carbonized titanium dioxide with good adsorption properties for cationic dyes via simple heat treatment

Methylene blue removal using a nanomagnetic support: a response surface approach

Methylene blue removal using nano-TiO2/MWCNT/Chitosan hydrogel composite beads in aqueous medium

Adsorption/photodegradation of crystal violet (basic dye) from aqueous solution by hydrothermally synthesized titanate nanotube (TNT)

Removal of anionic and cationic dyes from wastewater by adsorption using multiwall carbon nanotubes

A Mat Based on PVA Doped with TiO2 Nanoparticles for Removal of Methylene Blue Dye from Aqueous Solution and Improving the Carbon Footprint

Heterogeneous photocatalysis using TiO2 modified with hydrotalcite and iron oxide under UV-visible irradiation for color and toxicity reduction in secondary textile mill effluent

The Synthesis of Titania Nanoparticles (TiO2) and its Methylene Blue Dye removal efficiency through Photocatalysis based on Response Surface Methodology (RSM)

Tio2 Nanoparticles with High Ability for Selective Adsorption and Photodegradation of Textile Dyes under Visible Light by Feasible Preparation

Removal of Anionic Azo Dye from Aqueous Solution Via an Adsorption–photosensitized Regeneration Process on a TiO 2 Surface

High Photocatalytic and Adsorptive Performance of Anatase-Covered Titanate Nanotubes Prepared by Wet Chemical Reaction

Enhanced Adsorptive Removal of Methyl Orange and Methylene Blue from Aqueous Solution by Alkali-Activated Multiwalled Carbon Nanotubes

Adsorption and Desorption Study of Reusable Magnetic Iron Oxide Nanoparticles Modified with Justicia adhatoda Leaf Extract for the Removal of Textile Dye and Antibiotic

Highly efficient and rapid removal of a toxic dye: Adsorption kinetics, isotherm, and mechanism studies on functionalized multiwalled carbon nanotubes

Effective mitigation of single-component and mixed textile dyes from aqueous media using recyclable graphene-based nanocomposite