Abstract:Titanium nanotubes (TNT) is commonly synthesized from TiO2 P25 under hydrothermal reaction (HTR) using 10 M NaOH). Composite adsorbents derived from TiO2 and carbon spheres (CS) via a facile two-stage HTR process were investigated. CS was firstly synthesized from glucose through HTR. The mixture (CS, TiO2, and NaOH) was then transferred to a Teflon-lined autoclave for another HTC process to generate TNT/CS. The TNT/CS composite was calcined from 300 to 800 °C to evaluate the changes in its surface properties (functional group, morphology, and external charge), textural parameters, crystallinity, cation exchange capacity, and adsorption capacity. Results indicated that the Brunauer–Emmett–Teller surface area and total pore volume of composites were 25.0–131.9 m2/g and 0.099–0.33 cm3/g, respectively. The composites exhibited a negatively charged surface within pH 4.0–9.0, with their zeta potentials at pH 5.0 ranging from −54.60 to −31.1 mV. The result of X-ray photoelectron spectroscopy demonstrated that the main components (%atomic) in the composites were carbon (29.07 %–60.75 %), oxygen (29.09 %–49.16 %), titanium (2.93 %–17.52 %), and sodium (0.56 %–9.48 %). During the preparation of TNT/CS, CS (its negatively charged surface) can well absorb Na+ ions in the mixture. This phenomenon prevented the performance of tubular morphology from TNT/CS. The synthesized composites were regarded as multifunctional adsorbents for adsorbing various contaminants (Pb2+, Cd2+, Cu2+, cationic methylene blue dye, phenol, and toluene) in water. Equilibrium adsorption at pH 5.0 was carried out to estimate their adsorption capacities toward the selected contaminants. The Langmuir maximum adsorption capacities of Pb, Cd, Cu, phenol, methylene blue, and toluene were 534, 518, 514.2, 690, 329, 138 mg/g for TNT/CS and 334–523, 384–477, 297–453, 394–677, 303–416, 118–260 mg/g for the calcinated TNT/CS composites, and 26.3, 23.8, 21.4, 285, 239, 188 mg/g for commercial activated carbon, respectively. The adsorption mechanisms were elucidated based on the adsorption experiments and surface characteristics of TNT/CS. Ion exchange was the primary adsorption mechanism for the test cationic contaminants. The van der Waals force was an important adsorption mechanism for phenol and toluene. The developed TNT/CS composite can be employed as an effective adsorbent for adsorbing cationic and non-ionic contaminants from aqueous solutions.

Adsorption/photodegradation of crystal violet (basic dye) from aqueous solution by hydrothermally synthesized titanate nanotube (TNT)

Enhanced adsorption of carbon sphere by doping with titania nanotubes for crystal violet removal: isotherm, kinetics, and thermodynamic studies

Capture of Cs+ and Sr2+ from Aqueous Solutions by Using Cr Doped TiO2 Nanotubes

Removal of ciprofloxacin from aqueous solution using long TiO2 nanotubes with a high specific surface area

Photocatalytic disinfection of Coliforms and degradation of natural organic matters in river water using titanate nanotubes

Application of Titanate Nanotubes for Water Treatment

Adsorption-photocatalytic Degradation of Dye Pollutant in Water by Graphite Oxide Grafted Titanate Nanotubes

Adsorption and Desorption of Cd(Ii) Onto Titanate Nanotubes and Efficient Regeneration of Tubular Structures

Absorption of Cr(VI) onto amino-modified titanate nanotubes using 2-bromoethylamine hydrobromide through SN2 reaction.

Adsorption of U(VI) by Multilayer Titanate Nanotubes: Effects of Inorganic Cations, Carbonate and Natural Organic Matter

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Cr(VI) and Cr(III) with TiO2 and Titanate Nanotubes

Adsorption and photocatalytic degradation of methylene blue using high surface area titanate nanotubes (TNT) synthesized via hydrothermal method

Highly efficient adsorption of Cr(VI) from aqueous solutions by amino-functionalized titanate nanotubes

Photocatalytic degradation of crystal violet on titanium dioxide/graphene aerogel doped sulfur

Removal of Methyl Violet Dye by Adsorption Process on Hydrogen Titanate Nanotubes: Experimental-Theoretical Study

Mutual Promotion Mechanism for Adsorption of Coexisting Cr(Iii) and Cr(Vi) Onto Titanate Nanotubes

Visible Light-Driven Iodine-Doped Titanium Dioxide Nanotubes Prepared by Hydrothermal Process and Post-Calcination

Photocatalytic application of nickel oxide/zinc oxide nanoparticles decorated kaolinite nanocomposite for the degradation of crystal violet

Removal of Cd2+ from water containing Ca2+ and Mg2+ using titanate nanotubes modified by carbon

Adsorption characteristics of lead, copper, cadmium, methylene blue, phenol, and toluene in water using composite synthesized from titanium dioxides and carbon spheres through hydrothermal method

Crystal Violet degradation by visible light-driven AgNP/TiO 2 hybrid photocatalyst tracked by SERRS spectroscopy