Abstract:Magnesium alloys are identified as the new generation degradable biomaterials in the biomedical industry. They can prevent secondary operation for the removal of the inserted implant. Nowadays, sustainable manufacturing is promoting the use of low-temperature machining environments over the traditional means. Surface integrity characteristics of the machined surface and tool wear have always been some of the key interests of the researchers. In this research, aluminum titanium nitride-coated cemented carbide end mills were employed in an untreated and cryo-treated condition to machine the biomedical magnesium alloy AZ31B. The experiments were designed using one-factor-at-a-time (OFAT) approach, and milling operations were conducted under three different machining environments, namely wet, cryogenic, and hybrid. Spindle speed, feed rate, and depth of cut were chosen as the input control variables for a comparative study to achieve lowest surface roughness and highest surface microhardness. The results displayed an improvement in the outcome at higher spindle speed (2800 rpm) and lower feed rate (80 mm/rev) and depth of cut (0.5 mm) produced by untreated end mill during cryo-milling. However, the treated end mill performed best with hybrid machining environment (simultaneous application of LN2 and cutting fluid) during milling. Moreover, in this case, the accumulated oxides were found to form the most uniform and thinnest passivation layer over the milled surface. Higher spindle speed in cryo-milling achieved 27.45 and 19.56% better surface finish than wet and hybrid-milling, respectively. Moreover, higher spindle speed in cryo-milling achieved 14.46 and 8.72% higher surface microhardness than wet and hybrid-milling, respectively. Higher spindle speed in hybrid-milling achieved 14.89 and 6.97% better surface finish than wet and cryo-milling, respectively. Furthermore, higher spindle speed in cryo-milling achieved 7.69 and 4.10% higher surface microhardness than wet and cryo-milling, respectively.

Cryogenic ultrasonic vibration assisted turning to texturize AZ31 magnesium alloy surfaces

Improving the Surface Friction and Corrosion Resistance of Magnesium Alloy AZ31 by Ion Implantation and Ultrasonic Rolling

Ultrasonic Processing of Magnesium Alloy for Property Enhancement

Characteristics and Surface Serviceability for Cryogenic Milling Mg-1.6Ca-2.0Zn Medical Magnesium Alloy

Surface Quality for Cryogenic Milling Mg-1.6Ca-2.0Zn Medical Magnesium Alloy

The Influence of High Temperature Ultrasonic Processing Time on the Microstructure and Mechanical Properties AZ91E Magnesium Alloy

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

Generating micro/nanostructures on magnesium alloy surface using ultraprecision diamond surface texturing process

Tailoring Surface Integrity of Biomedical Mg Alloy AZ31B Using Distinct End Mill Treatment Conditions and Machining Environments

Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling

Ultrasonic atomization of magnesium alloy AZ61 based on the TIG melting method

Effects of sonication amplitude on the microstructure and mechanical properties of AZ91E magnesium alloy

Surface modification of biodegradable Mg alloy by adapting µ EDM capabilities with cryogenically-treated tool electrodes

Corrosion resistance improvement of 6061 aluminum alloy by 2D ultrasonic vibrations assisted turning

Improving the Tribological Properties of WE43 and WE54 Magnesium Alloys by Deep Cryogenic Treatment with Precipitation Hardening in Linear Reciprocating Motion

Ultrasonic Vibration-assisted Tube Extrusion Shear Expansion (UVaTESE): A Novel Process to Manipulate the Texture of AZ31 Magnesium Alloy

Experimental investigation of ultrasonic vibration-assisted cryogenic minimum quantity lubrication for milling of Ti-6Al-4V and grinding of Zerodur

Microstructure and Mechanical Properties of AZ31B Magnesium Alloy via Ultrasonic Surface Rolling Process

Sustainable High-Speed Milling of Magnesium Alloy AZ91D in Dry and Cryogenic Conditions

Effects of process parameters on the mechanical properties and microstructure in ultrasonic vibration-assisted warm tensile deformation of AZ31 magnesium alloy

Tuning Corrosion Properties of the Bio-Inspired AZ-Series Mg Alloys Using Electrochemical Surface Treatment under Varying Experimental Regimes