Abstract:Dye waste is one of the most serious types of pollution in natural water bodies, since its presence can be easily detected by the naked eye, and it is not easily biodegradable. In this study, zinc oxide nanoparticles (ZnO-NPs) were generated using a chemical reduction approach involving the zinc nitrate procedure. Fourier transform infrared (FTIR), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and UV-vis techniques were used to analyse the surface of ZnO-NPs. The results indicate the creation of ZnO-NPs with a surface area of 95.83 m2 g−1 and a pore volume of 0.058 cm3 g−1, as well as an average pore size of 1.22 nm. In addition, the ZnO-NPs were used as an adsorbent for the removal of Ismate violet 2R (IV2R) dye from aqueous solutions under various conditions (dye concentration, pH, contact time, temperature, and adsorbent dosage) using a batch adsorption technique. Furthermore, FTIR and SEM examinations performed before and after the adsorption process indicated that the surface functionalisation and shape of the ZnO-NP nanocomposites changed significantly. A batch adsorption analysis was used to examine the extent to which operating parameters, the equilibrium isotherm, adsorption kinetics, and thermodynamics affected the results. The results of the batch technique revealed that the best results were obtained in the treatment with 0.04 g of ZnO-NP nanoparticles at 30 °C and pH 2 with an initial dye concentration of 10 mg L−1, which removed 91.5% and 65.6% of dye from synthetic and textile industry effluents, respectively. Additionally, six adsorption isotherm models were investigated by mathematical modelling and were validated for the adsorption process, and error function equations were applied to the isotherm model results in order to find the best-fit isotherm model. Likewise, the pseudo-second-order kinetic model fit well. A thermodynamic study revealed that IV2R adsorption on ZnO-NPs is a spontaneous, endothermic, and feasible sorption process. Finally, the synthesised nanocomposites prove to be excellent candidates for IV2R removal from water and real wastewater systems.

Zinc Ions adsorption from aqueous solution using raw and acid-modified orange peels: Kinetics, Isotherm, Thermodynamics, and Adsorption mechanism

Zinc adsorption from aqueous solution using lemon, orange, watermelon, melon, pineapple, and banana rinds

Removal of Orange G and Rhodamine B dyes from aqueous system using hydrothermally synthesized zinc oxide loaded activated carbon (ZnO-AC)

Isotherm, kinetic, and thermodynamic studies of adsorption of copper (II) and nickel (II) ions using low‐cost treated orange peel from aqueous solutions

Effective adsorption and removal of industrial dye from aqueous solution using mesoporous zinc oxide nanoparticles via metal organic frame work: equilibrium, kinetics and thermodynamic studies

Perchlorate Adsorption Onto Orange Peel Modified by Cross-Linking Amine Groups from Aqueous Solutions

Zn(II) Removal with Activated Firmiana Simplex Leaf: Kinetics and Equilibrium Studies

Investigation of modified orange peel in the removal of Cd2+, Co2+ and Zn2+ from wastewater

Chemical Modification of Agro-Industrial Waste-Based Bioadsorbents for Enhanced Removal of Zn(II) Ions from Aqueous Solutions

Cationic surfactant modified iron nanoparticles for removal of orange II in batch mode: Kinetics, isotherms, mechanistic, and thermodynamic approach

Enhanced Adsorption of Zn(II) Onto Graphene Oxides Investigated Using Batch and Modeling Techniques

Orange peel as low-cost adsorbent in the elimination of Cd(II) ion: kinetics, isotherm, thermodynamic and optimization evaluations

Zinc Oxide Nanoparticles and Their Application in Adsorption of Toxic Dye from Aqueous Solution

Biosorption of Zinc from Aqueous Solution Using Chemically Treated Rice Husk.

Zinc Removal from Water via EDTA-Modified Mesoporous SBA-16 and SBA-15

Adsorption and Desorption Characteristics of Zinc on Ash Particles Derived from Oil Palm Waste

Linkage of iron elution and dissolved oxygen consumption with removal of organic pollutants by nanoscale zero-valent iron: Effects of pH on iron dissolution and formation of iron oxide/hydroxide layer

Loading of zinc oxide nanoparticles from green synthesis on the low cost and eco-friendly activated carbon and its application for diazinon removal: isotherm, kinetics and retrieval study

Equilibrium and kinetics studies on adsorption of Zn(II) from aqueous solutions onto a graft copolymer of cross-linked starch/acrylonitrile (CLSAGCP)

Study on Property and Mechanism of Adsorption of Chlorogenic Acids by Zinc-Containing D401 Macroporous Resin

Adsorption of Pb2+ using biosynthesized ZnO nanoparticles derived using Azadirachta indica (neem) leaf extract