Abstract:Structures having the shape of blades are often found in several practical engineering examples such as turbines and aircraft rotary wings. For reliable and economic designs of the structures, it is necessary to estimate the modal characteristics of those structures accurately. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. A single free standing blade can be considered as a pretwisted cantilever beam with a rectangular cross-section. The torsional vibration of pre twist cantilever beam of rectangular cross section is done so that this resembles to a blade. The differential equation for the torsional vibration of pre-twisted cantilever beam of rectangular cross section has been obtained. The beam is considered as Timoshenko beam instead of Euler-Bernoulli Beam or Rayleigh Beam because it will consider shear correction factor, rotary inertia, warping constant. The Galerkin’s method is used to obtain the frequencies of various modes of vibration. This is again solved by fem software ANSYS and their results are compared. Introduction The torsional vibration of a rotating structure can occur in many engineering applications such as turbomachinery blades, slewing robot arms, aircraft propellers, helicopter rotors, and spinning spacecraft. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. It is very important for manufacturers of turbo machinery components to know the natural frequencies of the rotor blades, because they have to make sure that the turbine on which the blade is to be mounted does not have some of the same natural frequencies as the rotor blade. Otherwise, a resonance may occur in the whole structure of the turbine, leading to undammed vibrations, which may eventually wreck the whole turbine. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. Moreover, under the resonance conditions, what limits the vibration amplitude is the amount of damping available. In most cases, the damping is almost entirely aerodynamic and its assessment is just as uncertain as the excitation. Thus, classic design practice for such structures has been mainly to rely on the knowledge of the natural frequencies to avoid anticipated resonances.

Dynamic Characteristics of a Rotating Tapered Cantilevered Timoshenko Beam with Preset and Pre-Twist Angles

Investigation of the effects of frequency veering phenomenon in a pre-twisted and double-tapered rotating Timoshenko beam

Combined Torsional-Bending-Axial Dynamics of a Twisted Rotating Cantilever Timoshenko Beam With Contact-Impact Loads at the Free End

Dynamic Characteristics of a Spinning Timoshenko Beam with Elastic Supports

Dynamic modeling and coupling characteristics of rotating inclined beams with twisted-shape sections

Dynamic modeling for rotating composite Timoshenko beam and analysis on its bending-torsion coupled vibration

Dynamic analysis of rotating double‐tapered cantilever Timoshenko nano‐beam using the nonlocal strain gradient theory

Free vibration analysis of rotating composite Timoshenko beams with bending-torsion couplings

DYNAMIC ANALYSIS OF A ROTATING TAPERED CANTILEVER BEAM BASED ON BEZIER CURVE INTERPOLATION

Stability for the Timoshenko Beam System with Local Kelvin–Voigt Damping

A Dynamic Model for A Rotating Beam Subjected to Axially Moving Forces

An Analytical Model of a Rotating Radial Cantilever Beam Considering the Coupling Between Bending, Stretching, and Torsion

Energy Expressions and Free Vibration Analysis of a Rotating Uniform Timoshenko Beam Featuring Bending—torsion Coupling

Flapwise bending vibration of rotating tapered Rayleigh cantilever beams

Modal analysis of a rotating twisted and tapered Rayleigh beam

Dynamic analysis of a rotating planar timoshenko beam using an accurate global spatial discretization method

Effect of Dead Load on Dynamic Characteristics of Rotating Timoshenko Beams

Nonlinear vibration analysis of tapered Timoshenko beams

Influence of flexural-torsional couplings and rotational effects on vibration behaviour of tapered thin-walled anisotropic biconvex beam

Dynamic Modeling and Vibration Control for a T-shaped Bending and Torsion Structure

Torsional Vibration Analysis of Pre-Twist Cantilever Beam Using FEM