Abstract:Loose wide-grading soils are commonly found in the source areas of debris flows, and in landslides after an earthquake. During rainfall events, fine particles (fines) in the soils gradually migrate downward, and eventually the loss of fines results in an increase in the pore volume of the soil and a reduction in the stability of the soil skeleton, which can lead to subsequent slope failure. To gain more understanding of the fine migration process at the microscopic scale, a 3D discrete element-fluid flow sequentially coupled model is developed, based on Darcy's Law, to simulate fluid flow through a porous medium and calculate the transportation of soil solids. The erosion model is verified using experimental data. Parametric studies are carried out to investigate the effects of coarse particle size. The results reveal that changes in pore structure caused by fine particle migration can change the local permeability of the material. For the case of the average pore throat diameter to fine particle ratio (\(J\)) of 2.41, changes in local porosity with time from internal erosion in the sample can be divided into four stages: (1) a rapid increase with some variations in porosity, (2) a slow increase in porosity, (3) a rapid increase in porosity, and (4) a steady state with no change in porosity. Not all stages are present for all value of \(J\). Stages (1) (2) (4) are present for 2.48 ≤ \(J\le\) 2.58 and stages (1) (4) are present for \(J\) ≤ 2.24 and \(J\hspace{0.17em}\)≥ 2.74. A sharp increase in the fine's erosion possibility occurs for a \(J\) value lies between 2.58 and 2.74. The erosion possibility sensibility shows an exponential relationship with \(J\). The model provides an effective and efficient way to investigate the process of pore blockage and internal soil erosion.

Coupled CFD–DEM Investigation of Erosion Accompanied by Clogging Mechanism under Different Hydraulic Gradients

Suffusion-induced Deformation and Microstructural Change of Granular Soils: a Coupled CFD–DEM Study

CFD-DEM Modeling of Suffusion Effect on Undrained Behavior of Internally Unstable Soils

Suffusion-Induced Evolution of Mechanical and Microstructural Properties of Gap-Graded Soils Using CFD-DEM

Multiscale Modeling of Seepage-Induced Suffusion and Slope Failure Using a Coupled FEM–DEM Approach

Effect of Fines Loss on the Microstructure and Shear Behaviors of Gap-Graded Soils: A Multiscale Perspective

A coupled CFD–DEM investigation of internal erosion considering suspension flow

A resolved CFD-DEM investigation into the onset of suffusion: effect of confining pressure and stress anisotropy

A CFD–DEM Study on the Suffusion and Shear Behaviors of Gap-Graded Soils under Stress Anisotropy

A coupled CFD-DEM investigation into hydro-mechanical behaviour of gap-graded soil experiencing seepage erosion considering cyclic hydraulic loading

Micromechanical Investigation of Suffusion and Its Consequence in Gap-Graded Granular Soil at the Opening of Underground Structures Using the Coupled CFD-DEM Method

A Coupled CFD-DEM Investigation into Suffusion of Gap-Graded Soil Considering Anisotropic Stress Conditions and Flow Directions

Fluid‐solid coupled model for the internal erosion of gap‐graded soil‐rock mixtures with different fines contents: its verification and application

A coupled CFD‐DEM investigation of suffusion of gap graded soil: Coupling effect of confining pressure and fines content

Review on Numerical Simulation of the Internal Soil Erosion Mechanisms Using the Discrete Element Method

Micromechanical analysis of contact erosion under cyclic loads using the coupled CFD‒DEM method

Clogging effect of fines in seepage erosion by using CFD–DEM

Numerical Investigations on Evolution Mechanism of Contact Erosion in Layered Soils Considering Particle-scale Parameters

Solid–fluid sequentially coupled simulation of internal erosion of soils due to seepage

A Coarse Graining CFD-DEM Simulation on Contact Erosion of Layered Cohesionless Soils

Estimation of the critical hydraulic gradient of coarse soil using the DEM-CFD coupling method