Abstract:In the literature, there are a small number of publications regarding the construction and application of machine tools that integrate several machining operations. Additionally, solutions that allow for such integration for complex operations, such as the machining of shape surfaces with complex contours, are relatively rare. The authors of this article carried out dimensional analysis of workpieces machined using a prototype Computerized Numerical Control (CNC) machine tool that integrates the possibilities of 3D scanning, milling operations in three axes, and grinding operations using abrasive discs. The general description of this machine tool with developed methodology and the most interesting results obtained during the experimental studies are given. For a comparative analysis of the influence of the machining method on the geometric accuracy of the test pieces, an Analysis of Variance (ANOVA) was carried out. The obtained results show that for four considered features (deviations of flatness, vertical parallelism, opening dimensions, and opening cylindricality), no statistically significant differences were detected. For the evaluation criteria, the probability level p exceeded the assumed confidence level α = 0.05 and ranged from p = 0.737167 to p = 0.076764. However, such differences were found for two others-a dimensional deviation between flat surfaces (p = 0.010467) and horizontal parallelism deviation (p = 0.0)-as well as for the quality of the machined surface defined by four surface texture parameters: Ra (p = 0.831797), Rt (p = 0.759636), Rq (p = 0.867222), and Rz (p = 0.651896). The information obtained by the ANOVA will be useful for the elimination the weaknesses of the prototype machine tool, further analysis of technological strategies, and to find possible benefits of integrating machining operations.

Robotised Geometric Inspection of Thin-Walled Aerospace Casings

Application of a 3D Scanner in Robotic Measurement of Aviation Components

Geometric Measurements on a CNC Machining Device as an Element of Closed Door Technology

A Robotic Boring System for Intersection Holes in Aircraft Assembly

Measurements of Geometrical Quantities and Selection of Parameters in the Robotic Grinding Process of an Aircraft Engine

Dimensional Control of Aircraft Transmission Bodies Using CNC Machines and Neuro-Fuzzy Systems

Analysis of Tool Geometry for the Stamping Process of Large-Size Car Body Components Using a 3D Optical Measurement System

Comparative analysis of the measurement accuracy of geometric features of aircraft components measured by 3D digitisation system and coordinate measuring technique

Adaptive robotic system for the inspection of aerospace slat actuator mount

An Integrated Architecture for Robotic Assembly and Inspection of a Composite Fuselage Panel with an Industry 5.0 Perspective

Application of 3D scanning and computer simulation techniques to assess the shape accuracy of welded components

Flexible integration of robotics, ultrasonics and metrology for the inspection of aerospace components

Robot-Assisted Ultrasonic Testing Technology for Complex Revolved Workpiece

Dimensional Analysis of Workpieces Machined Using Prototype Machine Tool Integrating 3D Scanning, Milling and Shaped Grinding

Real Time Pose Control of an Industrial Robotic System for Machining of Large Scale Components in Aerospace Industry Using Laser Tracker System

A Bevel Gear Quality Inspection System Based on Multi-Camera Vision Technology.

A Robot Chamfering System For Special-Shaped And Thin-Walled Workpieces

Zero-error-production through inline-quality control of presshardened automotive parts by multi-camera systems

3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot

Development of a complex of control and measuring procedures for parts with high-precision surfaces on CNC machines

A method combining laser and vision detection for on-line measurement of small modules gears