Investigating the combined effect of aggregate size and sulphate attack on producing sustainable recycled aggregate concrete

Md. Habibur Rahman Sobuz,Shuvo Dip Datta,Abu Sayed Mohammad Akid
DOI: https://doi.org/10.1080/14488353.2022.2088646
2022-06-17
Australian Journal of Civil Engineering
Abstract:This study investigates the performance of recycled aggregate concrete incorporating different sizes and concentrations of coarse aggregate under sodium sulphate and normal water curing. Ten mixes were produced, having two control mixes of 12 to 20 mm and 5 to 12 mm coarse aggregate size. The rest of the mixes have supplementary cementitious material with 0%, 15%, 30%, and 45% substitution of respective sizes normal aggregate by recycled aggregate. The fresh recycled aggregate concrete mixes were assessed through the slump, ball penetration, and compacting factor test, which exhibited a falling trend with the percentage increase of recycled aggregate. Moreover, compressive strength and ultrasonic pulse velocity drop with the percentage of RCA increases at 7, 28, and 91-days normal curing and 5% Na 2 SO 4 solution curing at 91 days. The compressive strength and ultrasonic pulse velocity of 5-12 mm coarse aggregate concrete showed improvement over 12–20 mm coarse aggregate concrete of the same replacement for both curing. However, 5% Na 2 SO 4 solution curing specimens exhibit around 5–11% decrease in compressive strength and higher penetration depth than normal curing . Furthermore, the outer face of the silica fume included samples have received fewer white patches after sodium sulphate immersion.
What problem does this paper attempt to address?