Abstract:Synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films. Polyvinyl alcohol (PVA) is a widely used polymer that is biocompatible, nontoxic, and water‐soluble due to the presence of hydroxyl groups in its domain. This study aims to investigate the effects of fumaric acid (FA) cross‐linking and thermal cross‐linking (TC) on the PVA's mechanical and thermal properties. When the FA is mixed with PVA, it was found in the chemical reaction that the OH groups of PVA are condensing with the carboxylic acid units of FA to yield new ester linkages and water as a by‐product, which further results in the reduction of the water absorption capacity. Quantitatively, the addition of 8 (wt. /wt. %) FA resulted in a minimum of 65% water absorption rate, as compared with 117% for pure PVA. The mechanical and thermal properties of PVA also enhanced with the addition of 2% to 8% FA by weight. For the TC case, the % increase in ultimate tensile strength was 30.9% and 42.5% with and without TC, respectively. As the wt. % of FA increased from 2 to 10%, the % elongation value decreased for both with and without TC films relative to pure PVA. The thermogravimetric analysis revealed the change in degradation temperature of FA‐PVA blended film in comparison with pure PVA. Dynamic mechanical analysis was utilized to analyze the viscoelastic nature and temperature variation at the glass transition temperature. The current fabricated film is a potential candidate for the food packaging films application; moreover, the results reported in this investigation will accelerate the industrial applications of biodegradable PVA. Highlights Increasing the weight percentage of fumaric acid leads to an enhancement in mechanical and thermal properties of the film. Esterification is the usual reaction between fumaric acid and polyvinyl alcohol (PVA), in which ester linkages are formed when the carboxyl groups (‐COOH) of fumaric acid and the hydroxyl groups (‐OH) of PVA combine. Water absorption characteristics of the film reduces as the wt. % of fumaric acid increases. Thermal cross‐linking of the film leads to further improvements in mechanical and thermal properties. The overall effect of increasing the wt. % of fumaric acid is negative on the glass transition temperature of the film. The developed film is a potential candidate for the food packaging films application.

Nonwoven viscose fabric‐polyvinyl alcohol based flexible composite

IMPACT OF GLUTARALDEHYDE CROSSLINKING AGENT ON THE PROPERTIES OF NONWOVEN VISCOSE FABRIC–POLYVINYL ALCOHOL FLEXIBLE COMPOSITES

Jute fibre reinforced biodegradable composites using starch as a biological macromolecule: Fabrication and performance evaluation

Thermally stable, mechanically strong, easily biodegradable and water-resistant Poly(vinyl alcohol) composites crosslinked by supported crosslinker

Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites

Bioinspired Strong, Tough, and Biodegradable Poly(Vinyl Alcohol) and its Applications as Substrates for Humidity Sensors

Synthesis of Composite Hydrogel Made of Woven Fabrics Stitched with PVA Yarn

A PVA-based electronic-packaging ceramic composite with water-degradable characteristics prepared by low-temperature fast firing

Preparation and characterisation of polyvinyl alcohol/glycerol blends thin film for sustainable flexibility

Development of biocompatible packaging material: starch/PVA-based bio-composite enhanced with hydroxypropyl methylcellulose

Eco-friendly synthesis of biodegradable and high strength ternary blend films of PVA/starch/pectin: Mechanical, thermal and biodegradation studies

Biopolymer Composites as an Alternative to Materials for the Production of Ecological Packaging

Metal Organic Frameworks Derived Sustainable Polyvinyl Alcohol/Starch Nanocomposite Films as Robust Materials for Packaging Applications

Fabrication of ecofriendly jute fiber reinforced flexible planar composite as a potential alternative of leather

Fabrication and evaluation of melamine-formaldehyde resin crosslinked PVA composite coating membranes with enhanced oxygen barrier properties for food packaging

Pretreatment of banana pseudostem fibre for green composite packaging film preparation with polyvinyl alcohol

Fabrication and characterization of eco-friendly biocomposites from waste coconut spathe fabric for sustainable progress

Fabrication and characterization of natural fiber reinforced cowpea resin-based green composites: an approach towards agro-waste valorization

Photo-crosslinkable poly (vinyl alcohol)/nanocrystalline cellulose composites with controllable performance and exceptional water vapor barrier property for packaging application

Integration of inorganic ionic oligomers and nanocellulose within PVA networks: A degradable and green nanocomposite with self-healable property and high mechanical strength in a wet state