Abstract:The utilization of multifunctional composite materials presents significant advantages in terms of system efficiency, cost-effectiveness, and miniaturization, making them highly valuable for a wide range of industrial applications. One approach to harness the multifunctionality of carbon fiber reinforced polymer (CFRP) is to integrate it with a secondary material to form a hybrid composite. In our previous research, we explored the use of carbonaceous material derived from coconut shells as a sustainable alternative to inorganic fillers, aiming to enhance the out-of-plane mechanical performance of CFRP. In this study, our focus is to investigate the influence of carbonized coconut shell particles on the non-structural properties of CFRP, specifically electromagnetic interference (EMI) shielding, thermal stability, and water absorption resistance. The carbonized material was prepared by thermal processing at 400 °C. Varying proportions of carbonized material, ranging from 1% to 5% by weight, were thoroughly mixed with epoxy resin to form the matrix used for impregnating woven carbon fabric with a volume fraction of 29%. Through measurements of scattering parameters, we found that the hybrid composites with particle loadings up to 3% exhibited EMI shielding effectiveness suitable for industrial applications. Also, incorporating low concentrations of carbonized particle to CFRP enhances the thermal stability of hybrid CFRP composites. However, the inclusion of carbonized particle to CFRP has a complex effect on the glass transition temperature. Even so, the hybrid composite with 2% particle loading exhibits the highest glass transition temperature and lowest damping factor among the tested variations. Furthermore, when subjected to a 7-day water immersion test, hybrid composites with 3% or less amount of carbonized particle showed the least water absorption. The favorable outcome can be attributed to good interfacial bonding at the matrix/fiber interface. Conversely, at higher particle concentrations, aggregation of particles and formation of interfacial and internal pores was observed, ultimately resulting in deteriorated measured properties. The improved non-structural functionalities observed in these biocomposites suggest the potential for a more sustainable and cost-effective alternative to their inorganic-based counterparts. This advancement in multifunctional composites could pave the way for enhanced applications of biocomposites in various industries.

Fabrication and characterization of eco-friendly biocomposites from waste coconut spathe fabric for sustainable progress

Influence of Waste Vetiver Root Fiber on Mechanical, Hydrophobicity, and Biodegradation of Soy-Based Biocomposites as Plastic Substitute

Fabrication and characterization of natural fiber reinforced cowpea resin-based green composites: an approach towards agro-waste valorization

Biodegradability and mechanical behavior of novel hybrid green composites fabricated with cashew shell particle, sisal fiber and corn starch resin

Fabrication and characterizations of screw pine root fiber reinforced soy composite as sustainable green composite

Enhancing the mechanical performance of carbon fiber reinforced polymer using carbonized coconut shell particles

Strength Characteristics of Electrospun Coconut Fibre Reinforced Polylactic Acid: Experimental and Representative Volume Element (RVE) Prediction

ANALYSIS OF COCONUT FIBER REINFORCED COMPOSITES WITH HOT PRESS TECHNIQUES

Preparation and characterization of bio-composite films obtained from coconut coir and groundnut shell for food packaging

Thermomechanical Analyses of Alkali-Treated Coconut Husk-Bagasse Fiber-Calcium Carbonate Hybrid Composites

Preparation and Antimicrobial Activity of Corn Cob and Coir Reinforced Biodegradable Starch Biocomposite Films for Food Packaging Application

Sustainable development of three distinct starch based bio-composites reinforced with the cotton spinning waste collected from fiber preparation stage

Jute fibre reinforced biodegradable composites using starch as a biological macromolecule: Fabrication and performance evaluation

Multifunctional composite with hybrid carbon fiber and carbonaceous coconut particle reinforcement

Novel okra woven fabric reinforced polylactic acid composites: Mechanical, morphological, and thermal properties

A polymer resin matrix modified by coconut filler and its effect on structural behavior of glass fiber-reinforced polymer composites

Studies on water uptake behavior and mechanical performance of bio-wastage-reinforced bio composites for improved sustainability

Influence of nano industrial waste and short coir fiber filler on hybrid inter and intra yarn bio fiber composites

Mechanical, tribological and modal characteristics of eco-friendly coir/sugarcane fillers reinforced polymer composites

Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite

Characterization and Performance of Additive Manufactured Novel bio-waste Polylactic acid eco-friendly Composites