Abstract:In order to limit the ever-increasing consumption of new resources for material formulations, regulations and legislation require us to move from a linear to a circular economy and to find efficient ways to recycle, reuse and recover materials. Taking into account the principles of material circularity and waste reuse, this research study aims to produce thermoplastic composites using two types of industrial waste from neighbouring companies, namely waste polypropylene (wPP) from household production and carbon-fibre-reinforced epoxy composite scrap from a pultrusion company. The industrial scrap of the carbon-fibre-reinforced epoxy composites was either machined/ground to powder (pCFRC) and used directly as a reinforcement agent or subjected to a chemical digestion process to recover the carbon fibres (rCFs). Both pCFRC and rCF, at different weight ratios, were melt-blended with wPP. Prior to melt blending, both pCFRC and rCF were analysed for morphology by scanning electron microscopy (SEM). The pCFRC powder contains epoxy resin fragments with spherical to ellipsoidal shape and carbon fibre fragments. The rCFs are clean from the matrix, but they are slightly thicker and corrugated after the matrix digestion. Further, the morphologies of wPP/pCFRC and wPP/rCF were also investigated by SEM, while the thermal behaviour, i.e., transitions and changes in crystallinity, and thermal resistance were evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. The strength of the interaction between the filler (i.e., pCFRC or rCF) and the wPP matrix and the processability of these composites were assessed by rheological studies. Finally, the mechanical properties of the systems were characterised by tensile tests, and as found, both pCFRC and rCF exert reinforcement effects, although better results were obtained using rCF. The wPP/pCFRC results are more heterogeneous than those of the wPP/rCF due to the presence of epoxy and carbon fibre fragments, and this heterogeneity could be considered responsible for the mechanical behaviour. Further, the presence of both pCFRC and rCF leads to a restriction of polymer chain mobility, which leads to an overall reduction in ductility. All the results obtained suggest that both pCFRC and rCF are good candidates as reinforcing fillers for wPP and that these complex systems could potentially be processed by injection or compression moulding.

Sandwich Composites from Recycled Plastic Bottles Combined with Epoxy Matrix and Fique Fabric

Recycled PET foam core sandwich panels with reinforced hybrid composite facesheets: A sustainable approach for enhanced impact resistance

Upcycling polyester fleece fabric waste into sustainable composites using glass microsphere modified epoxy matrix: performance investigation

Reuse polyester/cotton blend fabrics to prepare fiber reinforced composite: Fabrication, characterization, and interfacial properties evaluation

Thermoplastic composite sandwich panels with recycled PET foam core: A manufacturing process assessment

Manufacture of Green-Composite Sandwich Structures with Basalt Fiber and Bioepoxy Resin

Polymer composite material fabricated from recycled polyethylene terephthalate (PET) with polyurethane binder for potential noise control applications

Plastic Waste Valorization for Fused Deposition Modeling Feedstock: A Case Study on Recycled Polyethylene Terephthalate/High-Density Polyethylene Sustainability

Compressive Strength of Waste PET Bottle Based Fibre

A viable strategy to recycle post-used carbon fiber thermoset composites as a multi-functional filler for PP composites

Incorporating Textile-Derived Cellulose Fibers for the Strengthening of Recycled Polyethylene Terephthalate for 3D Printing Feedstock Materials

Upcycling Post-Consumer Paint Pail Plastic Waste

The Recycling of Comminuted Glass-Fiber-Reinforced Resin from Electronic Waste

Fatigue life analysis and damage evaluation in Glass Fiber Reinforced Composite materials based on recycled polyethylene terephthalate

Creating Sustainable Composites from Pyrolyzed Burlap and Ocean-Recycled Plastics using FDM

Novel Thermoplastic Composites Strengthened with Carbon Fiber-Reinforced Epoxy Composite Waste Rods: Development and Characterization

Analysis of the physical–mechanical behavior of the polymer composite reinforced with silicon flotation residue

Mechanical Strength and Surface Analysis of a Composite Made from Recycled Carbon Fibre Obtained via the Pyrolysis Process for Reuse in the Manufacture of New Composites

Sustainable Composites from Waste Polypropylene Added with Thermoset Composite Waste or Recovered Carbon Fibres

Synthesis of Reinforced Polyurethane Composites from a Matrix Composed of Recycled PET Oligomers Incorporating Undeveloped Brazilian Pine-Fruit Seeds

Estudio experimental del uso de residuos de botellas de plástico en el hormigón convencional