Abstract:Carbon fiber (CF) reinforced polyurethane (PU) composites have attracted increasing attention in recent years. It is still a challenge to recycle the CF reinforced composites, and there is no report on the recycling of CF from PU matrix. In this paper, for the first time, a readily recyclable CF reinforced PU composite was prepared based on a biobased acetal diol, 2-(4-hydroxy-3-methoxyphenyl)-1,3-dioxan-5-ol (HMDO). The acetal diol was synthesized from the lignin derivative vanillin and was used to react with hexamethylene diisocyanate trimer to prepare the PU thermoset (PU-HMDO). On account of the cleavable acetal groups, the PU-HMDO could be decomposed within 40 min in low-concentration acidic solution completely. In addition, the heterocyclic structures of acetal and isocyanurate resulted in excellent mechanical and thermal properties of PU-HMDO. The tensile strength was 68 MPa, the elongation at break was 7.9%, and the glass transition temperature (Tg) was 130 °C, which are comparable to those of a PU thermoset (PU-BPA) from commercially available diol bisphenol A (BPA). The thermal stability of PU-HMDO was even higher than that of PU-BPA. The PU-HMDO-based CF composite exhibited similar mechanical properties to the PU-BPA-based CF composite, and CF could be reclaimed with maintained microscale morphology, chemical structures, and mechanical properties under mild acid conditions. This work will open a door to develop readily recyclable PU-based CF composites.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02330?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02330</a>.TGA curve of PU-HMDO and the mixture obtained by rotary evaporation in the PU-HMDO preparation stage; illustration of PU-HMDO and PU-BPA; surface morphologies of CFRC and CF; gel content of PU-HMDO and PU-BPA; and the glass transition temperature (Tg) and the cross-link density (ve) of PU-HMDO after the solvent resistance test (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02330/suppl_file/sc0c02330_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis of Reinforced Polyurethane Composites from a Matrix Composed of Recycled PET Oligomers Incorporating Undeveloped Brazilian Pine-Fruit Seeds

Enhancing green polyethylene composites with filler heat treatment: Pecan nutshells and Pinus sawdust impact

Performance of castor oil polyurethane resin in composite with the piassava fibers residue from the Amazon

PU composites based on different types of textile fibers

Lightweight Biobased Polyurethane Composites Derived from Liquefied Polyol Reinforced by Biomass Sources with High Mechanical Property and Enhanced Fire-Resistance Performance

Polyethylene terephthalate (PET) as a recycled raw material for particleboards produced from pinus wood and biopolymer resin

Synthesis and Characterization of Wood Rigid Polyurethane Composites

Development of Bio-based Polyurethane Wood Adhesives from Agroindustrial Waste

Greener Nanocomposite Polyurethane Foam Based on Sustainable Polyol and Natural Fillers: Investigation of Chemico-Physical and Mechanical Properties

Recycling Polyurethane Materials to Improve Properties of Wood Composite Panels

High-Performance, Biobased, Degradable Polyurethane Thermoset and Its Application in Readily Recyclable Carbon Fiber Composites

Fire-Resistant Bio-based Polyurethane Foams Designed with Two By-Products Derived from Sugarcane Fermentation Process

Recycled brick red-based boards for thermal insulation: filler to polyurethane composite

Sustainable Composites: Analysis of Filler–Rubber Interaction in Natural Rubber–Styrene–Butadiene Rubber/Polyurethane Composites Using the Lorenz–Park Method and Scanning Electron Microscopy

Effect of Eco-Friendly Peanut Shell Powder on the Chemical Resistance, Physical, Thermal, and Thermomechanical Properties of Unsaturated Polyester Resin Composites

Green Composites Based on Unsaturated Polyester Resin from Recycled Poly(Ethylene Terephthalate) with Wood Flour as Filler—Synthesis, Characterization and Aging Effect

Cork Porous Biocomposites with Polyurethane Matrix Modified with Polyol Based on Used Cooking Oil

Preparation and Closed-Loop Recycling of Ultra-High-Filled Wood Flour/Dynamic Polyurethane Composites

Rigid composite bio-based polyurethane foams: From synthesis to LCA analysis

Synthesis and characterization of biopolyols through biomass liquefaction of wood shavings and their application in the preparation of polyurethane wood composites

Preparation and properties of poly (butylene adipate‐co‐terephthalate) composites with high bamboo flour content