Abstract:In this work, we designed and fabricated membrane and spongy materials for separating and absorbing different oils and organic solvents from effluent water. Initially, the activated biosorbent (ABs) material was prepared and used to coat the surface of filter paper and melamine sponge called (ABs@Membrane) and (ABs@Sponge). Developed ABs@Membrane and ABs@Sponge showed excellent hydrophobi city with excellent water contact angle. Moreover, the synthesized ABs@Sponge showed excellent oil/organic solvent absorption capacity in the presence of water, i. e., 40 gm of machine oil and 62 gm of chloroform. Whereas, the synthesized ABs@Membrane material showed excellent oil‐water separation efficiency (>90 %), water flux (219.29 Lm−2 h−1) with a good oil rejection ratio (>91 %). Different carbon‐based sorbents are widely used for the refinement of industrial as well as domestic effluent because of their availability, low cost, and excellent hydrophobicity. In this article, the activated biosorbent (ABs) material was prepared and applied to develop a membrane (ABs@Membrane) and sponge (ABs@Sponge) for effective oil and organic solvent cleanup from water mixtures. The one‐pot process was adopted to prepare ABs material by the simple carbonization of naturally available cotton and biowaste chitosan with sulphuric acid. The fabricated ABs@Membrane and ABs@Sponge showed excellent hydrophobicity with excellent water contact angle, i. e., 138.06° and 135.58°, respectively. Moreover, the synthesized ABs@Sponge showed excellent oil/organic solvent absorption capacity in the presence of water, i. e., 40 gm of machine oil and 62 gm of chloroform. Whereas the synthesized ABs@Membrane material showed excellent oil‐water separation efficiency (>90 %) and water flux (219.29 Lm−2 h−1) with a good oil rejection ratio (>91 %). The synthesized ABs@Membrane and ABs@Sponge material showed excellent recyclability performance up to 5th no of consecutive cycles. The straightforward synthesis and fabrication of ABs@Membrane and ABs@Sponge materials with excellent oil rejection ratio and oil/organic solvent separation performance open a new window in the effluent water treatment application.

Modelling and optimization of crude oil removal from surface water via organic acid functionalized biomass using machine learning approach

ANN-GA, ANFIS-GA and Thermodynamics base modeling of crude oil removal from surface water using organic acid grafted banana pseudo stem fiber

Application of Esterified Ogbono Shell Activated Biomass as an Effective Adsorbent in the Removal of Crude Oil layer from Polluting Water Surface

Bio-sorptive remediation of crude oil polluted sea water using plantain (Musa parasidiaca) leaves as bio-based sorbent: Parametric optimization by Taguchi technique, equilibrium isotherm and kinetic modelling studies

Biosorption and Kinetic Studies on Oil Removal from Produced Water Using Banana Peel

Response surface methodology optimization of the effect of pH, contact time, and microbial concentration on chemical oxygen removal potential of vegetable oil industrial effluents

Mathematical Modeling and Optimization Studies by Artificial Neural Network, Genetic Algorithm and Response Surface Methodology: A Case of Ferric Sulfate–Catalyzed Esterification of Neem (Azadirachta indica) Seed Oil

Removal of Heavy Crude Oil from Wastewater Using Activated Carbon Obtained from Oak Seed Husk Biodegradable Lignocellulosic Biomass

Fabrication and response optimization of Moringa oleifera-functionalized nanosorbents for the removal of diesel range organics from contaminated water

Crude oil removal from aqueous solution using raw and carbonized Xanthoceras sorbifolia shells

Adsorption Studies of Oil Spill Clean-up Using Coconut Coir Activated Carbon (CCAC)

Artificial neural network (ANN) and response surface methodology (RSM) algorithm-based improvement, kinetics and isotherm studies of electrocoagulation of oily wastewater

Modelling and Optimizing the Effect of pH on Remediation of Crude Oil Polluted Soil with Biochar Blend: RSM Approach

Acetylation of oil palm empty fruit bunch fiber as an adsorbent for removal of crude oil

Preparation of Newly Polymer-Coated Microbial Pellets and Their Adsorption and Degradation Properties for Oil-Containing Wastewater

Study on the Performance of Modified Banana Leaf Fiber in Removing Oil Spill from Seawater

Treatment of surfactant-stabilized oily wastewater using coalescing bed of bagasse fly ash (BFA) as a low-cost filter medium: modelling and optimization of process parameters

Robust Synthesis of Hydrophobic Biosorbent for Effective Oil/Organic Solvent Cleanup

Experimental study and machine learning modeling of water removal efficiency from crude oil using demulsifier

Surface functionalization of synthesized sodium alginate from brown algae for maximizing the yield of re-refined used lubricating oil using extraction-flocculation–an environment-friendly approach

Self-Driven Sustainable Oil Separation from Water Surfaces by Biomimetic Adsorbing and Transporting Materials