Abstract:An apparatus for transferring thermal energy across an impermeable barrier between two or more fluids is a heat exchanger. The effective transmission of heat from a hot fluid to a cold fluid is its primary goal. The temperature differential between the two fluids directly affects this heat transfer. Using CFD study with FLUENT 2020 R1, the performance characteristics of the compact plate fin heat exchanger's improved surfaces are examined. The simulation of heat transfer and flow encompassed a variety of velocities including completely turbulent regions. The pressure, temperature, and velocity contours were taken from the Fluent simulations. To determine the heat exchanger's flow and heat transfer performance, numerical analysis has been done. Since boundary conditions are crucial to CFD, they have been carefully chosen. The flow field, heat transfer, thickness, and wavelength were all predicted using the software code for a range of air to water velocities. Three distinct wavelengths of numerical simulations for a plate-fin heat exchanger were used in the study (10, 20, and 30). There were changes to the fin thickness, entry locations, and air and water entry velocities. Solid Works and Ansys were used to create the geometry for the three-level fin models that were placed inside the heat exchanger, both with and without a cover. For determining the heat exchanger's geometry and fin isometry, three levels measuring 19.6 mm in height and 53.64 mm in width were constructed. The fins have a thickness of 0.2 to 0.4 mm. As the air and water velocities vary, so does the temperature inside the heat exchanger. Because the topmost layer is a warm stream's flow channel, the temperature rises there, whereas the opposite effect is seen close to the bottom layer. Convection heat transmission to the surroundings and conduction heat transfer through the heat exchanger's side plates are the causes of fluid temperature fluctuations in the depth direction.

Transient analysis and parameter estimation with optimizations in a plate heat exchanger

Topography optimisation using a reduced-dimensional model for transient conjugate heat transfer between fluid channels and solid plates with volumetric heat source

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Dynamic Properties Modelling and Simulation of Plate Heat Exchanger Based on Matlab

Transient thermal analysis of the coupled radiative and convective heat transfer in a porous filled tube exchanger at high temperatures

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

A Transient Heat Current Model for Dynamic Performance Analysis and Optimal Control of Heat Transfer System

Numerical Modelling of Rapid Decrease in Water Flow Rate in a Plate-and-Tube Heat Exchanger

Heat Transfer and Pressure Drop in Plate Fin Heat Exchangers: A Numerical Approach

Novel study on inverse convection–conduction heat transfer for plate-finned tube heat exchanger

Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations

Thermodynamics Analysis on a Heat Exchanger Unit During the Transient Processes Based on the Second Law

State-space Model for Transient Behavior of Water-to-air Surface Heat Exchanger

A Numerical Study of Small-Scale Longitudinal Heat Conduction in Plate Heat Exchangers

Analysis of the Single-Blow Transient Testing Technique for Non-metallic Heat Exchangers

The single-blow transient test technique using pulse change inlet condition with optimized pulse width and matching time

Field Synergy Analysis of the Dynamic Process of a Multi-stream Heat Exchanger

Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins

An Improved Transient Algorithm Based on Distributed Parameter Model for Heat Exchangers

Numerical analysis of steady state and transient analysis of high temperature ceramic plate-fin heat exchanger

Characteristic Analysis and Structure Optimization of a Type of Plate Heat Exchanger